You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  2. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  3. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD RESEARCH CORPORATION            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  6. Interactive Sensor Fusion for Context-Aware Discrimination

    SBC: OPTO-KNOWLEDGE SYSTEMS INC            Topic: MDA15T001

    We propose a novel computational framework for discrimination that incorporates sensor data from observations of the engagement and from kill assessment (KA) that such sensors can provide. The KA information is combined with data from other sensors to improve the discrimination decision and to reduce the probability of correlated shots. Approved for Public Release 16-MDA-8620 (1 April 16)

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  7. Robust Classification through Deep Learning and Dynamic Multi-Entity Bayesian Reasoning

    SBC: EXOANALYTIC SOLUTIONS INC            Topic: MDA15T001

    Missile defense faces the challenges of rapidly maturing and evolving complex threats, possessing capabilities which require the use of all available resources to successfully detect, track and identify the lethal objects. Future performance will rely on multiple sensors such as ground and sea based radars and electro-optical and infrared sensors for target recognition. It is crucial to develop a ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  8. System of Systems Control Interactions

    SBC: Torch Technologies, Inc.            Topic: MDA15T002

    Control Theory tools and processes for analyzing the interactions of complex System of Systems (SoS) are lacking, specifically when sub-systems are independently designed and/or higher levels of SoS controls are applied. Integrating these sub-systems into the SoS, can result in dynamic interactions between these sub-systems and the SoS controls resulting in unexpectedly large deviations between ex ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  9. System of Systems Control Interactions

    SBC: GTD Unlimited LLC            Topic: MDA15T002

    In this research effort, GTD Unlimited will design tools for efficiently specifying, representing, and analyzing the interactions between control systems in System of Systems (SoS). Our approach will be to model the problem as an uncertain system and analyze the resulting models using control methods. Control methods can be related back to the standard Nyquist criterion for stability, ensuring t ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  10. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE, INC.            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government