You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Urbanscape: Single Shot Multi-Task 3D Reconstruction

    SBC: DZYNE Technologies Incorporated            Topic: DTRA18B001

    Hazard assessment tools that model the transport and dispersion of Chemical, Biological, Radiological, Nuclear and Explosive (CBRNE) materials through urban areas are only as good as the 3D models that inform the physics model. Maintaining accurate, up-to-date 3D models of urban areas is challenging. Even in the commercial world, urban construction and demolition may result in the models created a ...

    STTR Phase II 2020 Department of DefenseDefense Threat Reduction Agency
  2. Marburg Virus Prophylactic Medical Countermeasure

    SBC: Flow Pharma, Inc.            Topic: CBD18A002

    Through this STTR contract, we propose to evaluate the efficacy of our vaccine, FlowVax Marburg, in nonhuman primates (NHPs). This will be achieved through four Tasks. In Task 1, we will manufacture the vaccine in a quantity sufficient for the animal studies. In Task 2, we will perform MHC genotyping on a representative population of NHPs and, based on results, select a set of MHC-matched NHPs for ...

    STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense
  3. Marburg Virus Prophylactic Medical Countermeasure

    SBC: MAPP BIOPHARMACEUTICAL, INC.            Topic: CBD18A002

    There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terrible morbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditional vaccines have contributed greatly to public health, they have some limitations especially in the context of operati ...

    STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense
  4. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD Research Corporation            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens, whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial and alphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable an ...

    STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense
  5. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD Research Corporation            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is crucial to detect proliferation of nuclear material. Critical challenges include: (a) high sensitivity detection of signature emissions from radioactive isotopes, and (b) cost-effectiveness for deployment of sensor networks across large storage facil ...

    STTR Phase II 2019 Department of DefenseDefense Threat Reduction Agency
  6. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  7. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: Matsys Incorporated            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency

    SBC: Matsys Incorporated            Topic: DTRA16A002

    MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government