You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NLV Upper Stage Development and Flight Testing

    SBC: Garvey Spacecraft Corporation            Topic: T101

    Our Phase I results include a preliminary design for an advanced nanosat launch vehicle (NLV) upper stage that features several advanced propulsion technologies, as well as extensive empirical data from a series of pathfinding operations conducted at both the Pacific Spaceport Complex - Alaska on Kodiak Island and the Poker Flat Research Range. For Phase II, we are taking major steps, such as bui ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  2. NONA Repair of Composite Structures

    SBC: CORNERSTONE RESEARCH GROUP INC            Topic: T1202

    Supporting aerospace mission readiness, a system is needed that allows for composite repairs without the current roadblocks imposed by ovens, autoclaves, and expensive tooling. Cornerstone Research Group (CRG), its subsidiary NONA Composites, and the University of Dayton Research Institute (UDRI) presents NASA with the opportunity to obtain a rapid and robust method for on-site composite structura ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  3. Bantam Rocket Affordable SLV Stage (BRASS)

    SBC: EXQUADRUM INC            Topic: T101

    During the proposed Phase I research and development effort, the project team will integrate previously demonstrated technologies into a stage 4 propulsion system for an existing Small Launch Vehicle (SLV). The resulting fourth stage will meet launch vehicle requirements for Mass Fraction and Specific Impulse. Key stage component will be fabricated and demonstrated. The propulsion system will be ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  4. A Massively Parallel Framework for Low-Dissipation, Multiphysics Simulations of Rocket Engines

    SBC: CASCADE TECHNOLOGIES INC            Topic: T102

    In this proposal, researchers from Cascade Technologies and Stanford University outline a multi-year research plan to develop large-eddy simulation (LES) tools to predict and understand combustion instabilities in liquid-propellant rocket engines. Rocket instabilities are a notoriously complicated, multiscale problem involving nonlinear interactions between transcritical multiphase flows, turbulen ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  5. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion during Early Lift-Off

    SBC: CFD RESEARCH CORPORATION            Topic: T102

    Launch vehicles experience extreme acoustic loads dominated by rocket exhaust plume interactions with ground structures during lift-off, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling the turbulent plume physics during early lift-off are too dissipative to accurately resolve the propag ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  6. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD RESEARCH CORPORATION            Topic: T102

    Solid rocket motor (SRM) design requires thorough understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag in ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  7. Multiphysics Framework for Prediction of Dynamic Instability in Liquid Rocket Engines

    SBC: ATA ENGINEERING, INC.            Topic: T102

    Mitigation of dynamic combustion instability is one of the most difficult engineering challenges facing NASA and industry in the development of new continuous-flow combustion systems such as the combustion chambers in liquid-fueled rocket engines (LREs). Combustion instabilities are spontaneous, self-sustaining oscillations that tie the combustor acoustics to the combustion reaction itself. These ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  8. Optical Intersatellite Communications for CubeSat Swarms

    SBC: CROSS TRAC ENGINEERING, INC.            Topic: T1102

    The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor Kerri Cahoy of the Massa ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  9. Composite Repair System

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T1202

    GTL has developed an innovative composite repair methodology known as the Composite Repair System (CRS). In this phase I effort, CRS is being developed for the repair of damaged induced in thin-laminate composite cryotanks. In applying CRS to damaged composite structures, the required level of structural capacity is recovered to within a predetermined percentage of its original performance after ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  10. Prediction and Control of Selective Laser Melting Product Microstructure

    SBC: CFD RESEARCH CORPORATION            Topic: T1204

    Despite the rapid commercialization of additive manufacturing technology such as selective laser melting, SLM, there are gaps in models for material microstructure and property prediction that slow qualification and certification. Improvements in coupling microstructure prediction models to local process conditions, validation, and control of material microstructure are required to mature the stat ...

    STTR Phase I 2017 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government