Award Data

Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

Laser based advanced accelerators can achieve very high accelerating gradients, but their duty cycle is limited by the laser power availability and media recovery time. Inverse Free Electron Laser (IFEL) is a vacuum farfield laser accelerator scheme which does not rely on a medium (plasma) or a structure (metal or electric) and therefore is potentially capable of accelerating charged particles ver ...

A key requirement for microalgae biofuels production is a very low cost harvesting technology. Commercially available solidliquid separation technologies applicable to microalgae, such as chemical coagulation, membrane separations and centrifugation, are too costly for biofuels production or other lowcost microalgae processes, such as wastewater treatment. A low cost harvesting process is bio floc ...

In this project, aBeam will further develop and commercialize the metrology application developed by scientists at Lawrence Berkeley National Laboratory and supported by their patent. The product will improve the capabilities of high-performance metrological instrumentation. Our technology is the enabler of well characterized quantitative metrology at the nanoscale that does not exist thus far.

Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

Metal photoinjector cathode development has shown recent promise with nano-patterning technology. However, in order to be competitive with semi-conductor cathodes, a further enhancement in efficiency is needed. TECHNICAL APPROACH Specific nano-patterning of sub-wavelength features to produce antennae provides coupling of incoming laser light with the surface of the metal cathode. Bowtie nano-anten ...

NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

We propose to mature LG-X glider technology by manufacturing full-scaled prototypes and characterizing them in land-based flight-testing by using commercial aircraft to drop the gliders. Validated components such as the landing parachute, folding wing mechanism, and autopilot control system will undergo integrated flight-testing. Logistic Gliders will provide a considerable cost share to support ...

Transmission electron microscopy (TEM) is one of the primary tools for biological and materials characterization and has many important research applications. There is an overarching need to improve the temporal resolution of TEMs. State-­‐of-­‐the-­‐art single shot TEM only achieve 10 nanoseconds temporal resolution. Technical Approach UCLA and RadiaBeam Tec ...

The advanced energy economy will be a dominant market force in the 21st century, one driven by US demand but asymmetrically low domestic supply without immediate action. This project focuses on the development and US manufacturing of a new battery membrane that enables low-cost and long-lived Li-ion batteries.