You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: Millennitek, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  2. Scalable System for Precision Direction-Finding, Anti-Jam, and Anti-Spoof

    SBC: TOYON RESEARCH CORPORATION            Topic: A15AT013

    The Global Positioning System (GPS) is vulnerable to radio-frequency (RF) sources of interference and must be defended through electronic protection (EP) measures such as anti-jam (AJ) and anti-spoof (AS). The Phase I effort investigated antenna, electronic, and algorithmic designs for systems capable of supporting direction-finding (DF) measurements while simultaneously performing anti-jam and an ...

    STTR Phase II 2017 Department of DefenseArmy
  3. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A15AT001

    As the warfighter is increasingly using more highly integrated instruments, e.g. a laser rangefinder (LRF) combined with a laser designator and an imager, the need to decrease the size of these components becomes more important.Compact small munition applications of rangefinders particularly place an emphasis on size of the optical front end.In order to make the transceiver more compact, special a ...

    STTR Phase II 2017 Department of DefenseArmy
  4. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: Eureka Aerospace            Topic: A14AT004

    This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...

    STTR Phase II 2016 Department of DefenseArmy
  5. Ultrafast Physical Random Number Generation Using Chaos

    SBC: Torch Technologies, Inc.            Topic: A14AT002

    Random numbers are essential for a growing number of modern applications. As computer speed and communications bandwidth have increased the potential for practical streaming cipher and large-scale Monte Carlo simulations have become technologically feasible. For these and other applications, ultrafast random number generators are essential. This is intuitively clear. Additionally, however, the ide ...

    STTR Phase II 2016 Department of DefenseArmy
  6. Parallel Two-Electron Reduced Density Matrix Based Electronic Structure Software for Highly Correlated Molecules and Materials

    SBC: Q-CHEM, INC.            Topic: A14AT013

    Variational two-electron reduced-density-matrix (v2RDM) methods can provide a reference-independent description of the electronic structure of many-electron systems that naturally captures multireference correlation effects. These methods offer one of the few possible routes to performing the large-active-space computations that are necessary for the qualitative description of strongly-correlated ...

    STTR Phase II 2016 Department of DefenseArmy
  7. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: Ness Engineering, Inc.            Topic: A14AT004

    The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...

    STTR Phase II 2016 Department of DefenseArmy
  8. An Ultra-Compact Low-Power THz Radio SoC with On-Chip Antenna and Energy Harvesting

    SBC: Digital Analog Integration, Inc.            Topic: A15AT005

    There is an unmet demand for ultra-low-power, ultra-compact and low-cost radios to address emerging sensing and communication needs for military and commercial applications such as IoT/IoE. To overcome the limitations in existing bulky and power hungry radios, we propose a disruptive solution by integration of a nano-scaled THz transceiver, on-chip antenna, and energy harvesting circuits in a form ...

    STTR Phase II 2016 Department of DefenseArmy
  9. Electronically Tunable High-Power Infrared Lasers for Standoff Detection Applications

    SBC: Pranalytica, Inc.            Topic: A14AT015

    In response to the Army STTR Topic A14A-T015 solicitation for tunable high-power LWIR lasers for standoff detection applications, Pranalytica proposed to develop a compact, rugged and highly reliable wavelength tunable quantum cascade laser (QCL) module delivering over 5W of peak power and over 0.5W of average power in the spectral region spanning from 7 to 11m. The proposed approach is based on a ...

    STTR Phase II 2016 Department of DefenseArmy
  10. Revolutionary Airlift Innovation

    SBC: Logistic Gliders Inc.            Topic: ST14B004

    We propose to mature LG-X glider technology by manufacturing full-scaled prototypes and characterizing them in land-based flight-testing by using commercial aircraft to drop the gliders. Validated components such as the landing parachute, folding wing mechanism, and autopilot control system will undergo integrated flight-testing. Logistic Gliders will provide a considerable cost share to support ...

    STTR Phase II 2016 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government