You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: SA Photonics, Inc.            Topic: N15AT014

    SA Photonics has developed a concept for our Multiple Optical Beam Landing System (MOBLS) to provide autonomous landing of aircraft in RF denied environments. MOBLS utilizes multiple, redundant methods to determine the real-time location and bearing of the aircraft relative to the carrier-based landing strip. By having built in redundant modalities, MOBLS provides highly reliable landing informati ...

    STTR Phase II 2017 Department of DefenseNavy
  2. Auto-Docking Autonomous Burial Vehicle (AD-ABV)

    SBC: Makai Ocean Engineering, Inc.            Topic: N11AT017

    Subsequent Phase II Proposal, extension of Phase II contract N00039-12-C-0082. This contract involves the development of an underwater vehicle that can reliably and autonomously interconnect power and data cables to undersea nodes after they have been deployed. The Auto-Docking Autonomous Burial Vehicle (AD-ABV) is a cable-connecting adaptation of Makai’s proven ABV, which has been successfully ...

    STTR Phase II 2017 Department of DefenseNavy
  3. Body-worn Wireless Physiological Monitoring Network

    SBC: Cognionics, Inc.            Topic: N13AT021

    This STTR Phase II proposal continues our work towards building a simple, high quality and unobtrusive mobile physiological sensor platform. The capabilities of the Phase I prototype will be expanded by adding sensors to further acquire SpO2 and respiration in addition to forming a body area network for data collection across multiple points on a subjects body. A software infrastructure will also ...

    STTR Phase II 2017 Department of DefenseNavy
  4. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  5. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N16AT018

    Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (peopleand/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, suchsystems may also form the equivalent of an underwater cell phone network using sound to carry the information. The acous ...

    STTR Phase II 2017 Department of DefenseNavy
  6. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV Systems, LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Embedded Space Analytics

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: N16AT020

    Navy needs a real-time graph embedding tool for analyzing huge graphs (millions of nodes and billions of edges) from diverse sources. However, current approaches cannot provide dynamic and scalable graph analytics to signify the military value of tactical data. In this project, InfoBeyond advocates EStreaming (Embedding & Streaming) for scalable and efficient graph streaming. EStreaming promotes b ...

    STTR Phase II 2017 Department of DefenseNavy
  8. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  9. Innovative Physics-based Modeling Tool for Application to pRFID System on Rotorcraft

    SBC: MATHEMATICAL SYSTEMS & SOLUTIONS INC            Topic: N15AT005

    We propose development of a software capability which, based on use of accurate and efficient exact-physics computational electromagnetics (CEM) solvers together with CAD-import (Computer Aided Design) and direct CAD-to-EM capabilities, will enable optimization of the properties of on-platform pRFID tag/reader antenna systems. For accuracy and modeling flexibility the proposed codes are based on M ...

    STTR Phase II 2017 Department of DefenseNavy
  10. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: Intelligent Optical Systems, Inc.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government