You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Compact Laser Drivers for Photoconductive Semicond

    SBC: Scientific Applications & Research Associates, Inc.            Topic: DTRA16A004

    For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  3. Portable System with Li Foil MWPC Neutron Detectors

    SBC: Radiation Detection Technologies, Inc.            Topic: DTRA14B005

    At the completion of the research and development effort a Li-foil multi-wire proportional counter (MWPC) neutron detector with more than 625-cm2 of active area will be included in a portable radiation detection system. The system is expected to outperform the standards set by the ANSI N42.53 standards, and gamma-ray rejection ratio (GRR) of 1.0x10-8 or better. A gamma-ray spectrometer for isotope ...

    STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
  4. Integrated Monitoring AWAReness Environment (IM-AWARE)

    SBC: AMERICAN GNC CORPORATION            Topic: T1301

    American GNC Corporation (AGNC) and Louisiana Tech University (LaTECH) are proposing a significant breakthrough technology, the Integrated Monitoring AWAReness Environment (IM-AWARE) consisting of an Enterprise Infrastructure with closely coupled smart sensor networks and Enhanced IT Security to enable: (i) real time monitoring of the distribution systems health; (ii) supporting maintenance operat ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  5. Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System

    SBC: AMERICAN GNC CORPORATION            Topic: T13

    To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Sensitivity Analysis for Design Optimization Integrated Software Tools

    SBC: Linked, Inc.            Topic: T401

    The objective of this Phase 2 proposal is to provide a new set of sensitivity analysis theory and codes, the Sensitivity Analysis for Design Optimization (SADO) software that integrates with the existing NASA O3 Tool. In this Phase II effort, the sensitivity codes developed in Phase I will add functionality to simplify Ground Vibration Test, or model tuning, by calculating a number of error metric ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  7. Multifunctional Environmental Digital Scanning Electron Microprobe (MEDSEM)

    SBC: Chromologic LLC            Topic: T801

    Chromologic (CL) and the California Institute of Technology (Caltech) propose to continue the Phase II STTR development and demonstration of a Multifunctional Environmental Digital Scanning Electron Microprobe (MEDSEM) instrument that transmits high energy beams of electrons sequentially using a two-dimensional array of multiple, miniaturized electron probes into a planetary atmosphere and strike ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  8. A Novel, Membrane-Based Bioreactor Design to Enable a Closed-Loop System on Earth and Beyond

    SBC: Mango Materials, Inc.            Topic: T604

    The proposed innovation is a membrane bioreactor system to produce a biopolymer from methane gas that is applicable in outer space environments. This new methane fermentation process will expand and advance current gas delivery techniques to create affordable fermentation methods on Earth and beyond. Mango Materials is currently working to scale up and commercialize the production of polyhydroxyal ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  9. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD RESEARCH CORP            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  10. Structural Nervous System

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T12

    GTL proposes to further the development of its SNS technology towards adoption into aerospace structures. The SNS technology is an enabler technology for the expanded use of structural health monitoring systems. It allows the large data architectures needed for these types of systems to be implemented with minimal mass and impact to structural performance. GTL will accomplish this by automating th ...

    STTR Phase II 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government