You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. ACE Booster

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T1

    GTL has been developing a suite of transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm.BHL composite cryotank technology provides a four times improvement over large aluminum iso-grid tanks, offering a 6 percentage point improvement in small stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize combus ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. A Coupled System for Predicting SPE Fluxes

    SBC: PREDICTIVE SCIENCE INCORPORATED            Topic: T602

    Solar Particle Events (SPEs) represent a major hazard for extravehicular maneuvers by astronauts in Earth orbit, and for eventual manned interplanetary space travel. They can also harm aircraft avionics, communication and navigation. We propose to develop a system to aid forecasters in the prediction of such events, and in the identification/lengthening of "all clear" time periods when there is ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  3. Active Radiation Shield

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T301

    DEC-Shield technology offers the means to generate electric power from cosmic radiation sources and fuse dissimilar systems and functionality into a structural component to create a Multi-functional Structure (MFS). DEC-Shield integrated into MFS technology can be used to generate electric power and provide radiation protection in a space vehicle; even maximizing that protection by spreading the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  4. Active Radiation Shield

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T301

    In the Phase I effort, Gloyer-Taylor Laboratories LLC (GTL) verified the feasibility of generating power from space particle radiation. This effort successfully demonstrated electrical power production from a particle radiation source using an initial proof-of-concept device. The effort also identified a second approach that has the potential for even better power generation and offers enhanced ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  5. Advanced Gas Sensing Technology for Space Suits

    SBC: Intelligent Optical Systems, Inc.            Topic: T601

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  6. Advanced Gas Sensing Technology for Space Suits

    SBC: Intelligent Optical Systems, Inc.            Topic: T6

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  7. Air Vehicle Gust Response analysis for Conceptual Design

    SBC: Research In Flight, LLC            Topic: T15

    Research in Flight (RIF) and Auburn University are offering the development of an advanced, robust tool and methodology that allows the simulation and modeling of gust and wake vortex encounters for Distributed Electric Propulsion (DEP) enabled Urban Air Mobility (UAM) vehicle concepts. DEP enabled UAM concepts offer the potential for large performance improvements by exploiting favorable synergie ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  8. A Massively Parallel Framework for Low-Dissipation, Multiphysics Simulations of Rocket Engines

    SBC: CASCADE TECHNOLOGIES, INC.            Topic: T102

    In this proposal, researchers from Cascade Technologies and Stanford University outline a multi-year research plan to develop large-eddy simulation (LES) tools to predict and understand combustion instabilities in liquid-propellant rocket engines. Rocket instabilities are a notoriously complicated, multiscale problem involving nonlinear interactions between transcritical multiphase flows, turbulen ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  9. A Modular In-Situ Curing Apparatus for Thermoset Resin Mixtures Applied as Thermal Protection Systems

    SBC: Intelligent Optical Systems, Inc.            Topic: T12

    Future human extraterrestrial missions will require export and landing of countless payloads on the lunar and Martian surfaces. Such a quantity and rate of payload delivery will require cost-effective and rapid manufacturing of many large Thermal Protection Systems (TPS). IOS proposes to develop a modular system for in-situ bonding and curing of thermoset resin to the spacecraft structure to facil ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  10. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: MORNINGBIRD MEDIA CORPORATION            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government