You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  3. Compact Laser Drivers for Photoconductive Semicond

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  4. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point ofCare Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    GeneCapture, Inc. is proposing to develop a rapid in vitro diagnostic prototype using our patented molecular-based CAPTURE (ConfirmActive Pathogens Through Unamplified RNA Expression) assay. Based on the results and experience gained in our Phase I STTR contractHDTRA1-16C-0061: Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications, we p ...

    STTR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense
  5. Advanced Gas Sensing Technology for Space Suits

    SBC: Intelligent Optical Systems, Inc.            Topic: T6

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  6. Highly Efficient Closed-Loop CO2 Removal System for Deep-Space ECLSS

    SBC: TDA Research, Inc.            Topic: T6

    TDA Research Inc.(TDA) in collaboration with University of Puerto Rico – Mayaguez (UPRM is proposing to develop a highly efficient CO2 removal system based on UPRM proprietary strontium exchanged silico-alumino-phosphate (Sr-SAPO-34) sorbent for closed loop space craft cabin air re-vitalization during deep space missions. In the Phase I work, we successfully completed bench-scale proof-of-concep ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. ACE Booster

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T1

    GTL has been developing a suite of transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm.BHL composite cryotank technology provides a four times improvement over large aluminum iso-grid tanks, offering a 6 percentage point improvement in small stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize combus ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  8. uG-LilyPond- Floating Plant Pond for Microgravity

    SBC: Space Lab Technologies, LLC            Topic: T7

    Regenerative space life support will undoubtedly require food production, to recover nutrients and close the carbon loop in a spacecraft habitat. Aquatic plants have enormous potential for edible biomass production but have been little studied as potential food crops for space applications. The proposed μG-LilyPond™ is an autonomous environmentally controlled floating plant cultivation system ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  9. Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System

    SBC: AMERICAN GNC CORPORATION            Topic: T13

    To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  10. Sensitivity Analysis for Design Optimization Integrated Software Tools

    SBC: Linked, Inc.            Topic: T401

    The objective of this Phase 2 proposal is to provide a new set of sensitivity analysis theory and codes, the Sensitivity Analysis for Design Optimization (SADO) software that integrates with the existing NASA O3 Tool. In this Phase II effort, the sensitivity codes developed in Phase I will add functionality to simplify Ground Vibration Test, or model tuning, by calculating a number of error metric ...

    STTR Phase II 2017 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government