You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Soft Robotic Manipulators with Enhanced Perception using Multimodal Sensory Skins

    SBC: Other Lab Inc.            Topic: T11

    Otherlab and the Faboratory propose that a key component of future NASA robot technology will benbsp;continuum joint-based fluidic actuation, valuable for its light weight, low packing volume, inherent shock amp; vibration isolation, and ability to interact safely with unstructured environments and near humans.nbsp;Over the course of our Phase I amp; Phase II projects we have developed such a nove ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. ACE Booster

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T1

    GTL has been developing a suite of transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm.BHL composite cryotank technology provides a four times improvement over large aluminum iso-grid tanks, offering a 6 percentage point improvement in small stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize combus ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  3. Enhanced Real Time Distributed Strain and Temperature Monitoring for Rocket Ground Testing

    SBC: Intelligent Fiber Optic Systems Corporation            Topic: T13

    IFOS proposes an innovative Brillouin sensing system ndash; B*Sensetrade; ndash; for enhanced, distributed strain and temperature measurements in harsh environments. Brillouin sensing provides both temperature and strain measurement along the entire length of fiber, allowing the entire fiber to act as a sensor. B*Sensetrade; will enable identification of defects, such as fatigue cracking or excess ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  4. Electric Field Prediction and Mapping Methods Within Spacecraft Enclosures

    SBC: Sonelite, Inc.            Topic: T5

    The proposed innovation is a new simulation tool for NASArsquo;s prediction and mitigation of hazardous electric fields created within the payload enclosure and similar electromagnetic field cavities of a launch vehicle and a spacecraft. The research will extend existing statistical power balance modeling methods to specific NASA requirements, includingnbsp; 1) Mapping the different electric field ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  5. Dual Mode Green Monopropellant Propulsion System for Interplanetary Missions

    SBC: Plasma Processes, LLC            Topic: T2

    Today many spacecraft carry two propulsion options: high thrust required for high acceleration maneuvers such as orbit insertion and rapid response; and low thrust required for station keeping and less critical maneuvers. A new class of non-toxic monopropellants, such as AF-M315E and LMP-103S, perform well in both high and low thrust regimes. Significant investments are maturing both monopropellan ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  6. Distributed Multi-GNSS Timing and Localization (DiGiTal) 2.0 for Nanosatellites

    SBC: Tyvak Nano-Satellite Systems, Inc.            Topic: T4

    he Distributed Multi-GNSS Timing and Localization (DiGiTaL) 2.0 system will leverage an existing partnership between Tyvak and the Stanfordrsquo;s Space Rendezvous Laboratory (SLAB) to advance the development required to provide precise knowledge of absolute and relative states of multiple orbiting nanosatellites necessary to mimic a gigantic spacecraft though a swarm of spacecraft with adjustable ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  7. Multispectral Mid-Infrared Laser

    SBC: Mirios, Inc.            Topic: T8

    We proposenbsp;to construct a multispectral MWIR light sourcenbsp;consisting of a single silicon chip which will generate and combine lightnbsp;from a wide MWIR spectral range. Compared to existing conventional MWIR emitters, we will significantly broaden the available wavelength emission range and combine light on-chip, removing the need fornbsp;free-space optics.nbsp;

    STTR Phase I 2019 National Aeronautics and Space Administration
  8. Broadband Arrayed Waveguide Grating with Microwave Kinetic Detector Array for Fully Integrated High-Resolution Photonic Spectrograph

    SBC: ULTRA-LOW LOSS TECHNOLOGIES LLC            Topic: T8

    Here we propose developing a spectrometer where the light is separated and channelized by an photonic integrated circuit (PIC) and is then detected by an energy-resolving superconducting detector. nbsp;nbsp;Thenbsp; instrument would be a radical new type of high resolution spectrograph applicable for both multi-object and integral field unit (IFU) nbsp;spectroscopy and other fiber-fed light applic ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  9. A Modular In-Situ Curing Apparatus for Thermoset Resin Mixtures Applied as Thermal Protection Systems

    SBC: Intelligent Optical Systems, Inc.            Topic: T12

    Future human extraterrestrial missions will require export and landing of countless payloads on the lunar and Martian surfaces. Such a quantity and rate of payload delivery will require cost-effective and rapid manufacturing of many large Thermal Protection Systems (TPS). IOS proposes to develop a modular system for in-situ bonding and curing of thermoset resin to the spacecraft structure to facil ...

    STTR Phase I 2019 National Aeronautics and Space Administration
  10. Thin-Ply Inflatable Composites with Drop Stitch Reinforcement

    SBC: Martin Defense Group, LLC            Topic: T12

    Drop stitch reinforced textiles are a subset of 3D woven textiles that are well suited for flexible inflatable composite applications. These flexible composites provide a dimensionally-stable solution for inflatable structures, enabling creation of various deployable foldable shapes and cross-sections. Incorporating pile yarns between face reinforcement layers yields precise control over the infla ...

    STTR Phase I 2019 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government