You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Hesitivity Magnetic Materials for Magnetic Toroid and Flat Dipole Antennas

    SBC: JEM ENGINEERING, LLC            Topic: N16AT001

    In our Phase I program, JEM and ASU will demonstrate a low cost manufacturing process to achieve the full theoretical hesitivity of a magnetic film that would enable greater effective hesitivity laminate. In Phase II we will develop a viable continuous process for two such materials to achieve light weight, low cost, and improved radiation efficiency; and we will seek to productize this process to ...

    STTR Phase I 2016 Department of DefenseNavy
  2. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: IBC Materials & Technologies, LLC            Topic: N16AT005

    In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...

    STTR Phase I 2016 Department of DefenseNavy
  3. Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation

    SBC: ISSAC Corp            Topic: N16AT009

    The ISSAC Team leverages existing knowledge and expertise in power system monitoring, fault identification, localization and isolation in conjunction with rich, deep data analytics for pattern matching to devise a system for Medium Voltage Direct Current (MVDC) power system fault management. Because of the differences between AC and DC power grids there are a significant number of problems in deal ...

    STTR Phase I 2016 Department of DefenseNavy
  4. Cyber Forensic Tool Kit for Machinery Control

    SBC: Intelligent Automation, Inc.            Topic: N16AT013

    For machinery control systems, forensics is a vital part to provide a cyber-protection strategy and aid in identification and troubleshooting of system malfunctions due to malicious and non-malicious events. A number of unique challenges exist for the forensic analysis of SCADA based systems. Components of a SCADA system are often resource constrained. In addition, SCADA based systems have a criti ...

    STTR Phase I 2016 Department of DefenseNavy
  5. Computational Methods for Dynamic Scene Reconstruction

    SBC: Robotic Research LLC            Topic: N16AT017

    Reconstruction of dynamic scenes is at the limits of the state of the art. It is still challenging to accurately reconstruct models in static scenes. Dynamic scenes add a list of challenges that further complicate the problem:separating the dynamic objects from the motion created by the camera motionMorphological changes to the dynamic object itself. Not only is the system moving, but it is actual ...

    STTR Phase I 2016 Department of DefenseNavy
  6. LCS Radar Modeling for Training (LRMT)

    SBC: Intelligent Automation, Inc.            Topic: N14AT012

    We propose the design and development of LCS radar modeling for training a radar modeling engine that capture the effects of environment, weather, jamming/interference and operator actions on radar display. The purpose of this engine is to reduce or eliminate the need for live training by faithfully capturing the scenarios encountered by a radar operator. The primary target radars for the propose ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Durable, Low Friction Coatings For Air Cycle Machine Foil Bearings

    SBC: Technology Assessment and Transfer, Inc.            Topic: N16AT005

    Technology Assessment and Transfer will demonstrate the potential of novel, low friction and low wear coatings that are capable of providing long term durability for air cycle machine foil bearings. A systematic approach with a high probability of success includes the following: unique low friction, wear resistant alloys and lubricating ceramic composites, magnetron sputtering, the ideal method fo ...

    STTR Phase I 2016 Department of DefenseNavy
  8. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GeneCapture, Inc.            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  9. Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting CORC Power Cables

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: N16AT011

    Future power systems on board Navy ships require electrical power in the order of 20 to 80 MW, which currently cant be provided by conventional copper or aluminum power cables. Advanced Conductor Technologies LLC (ACT) has been developing high-temperature superconducting Conductor on Round Core (CORC) power transmission cables, rated at 10 kA per phase, for the Navy that form a potential solution ...

    STTR Phase I 2016 Department of DefenseNavy
  10. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: VEXTEC CORPORATION            Topic: N16AT004

    The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government