You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD RESEARCH CORPORATION            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  2. Engineered DLC based Wear Resistant Coating For Extended Life Foil-Air Bearings

    SBC: NOKOMIS INC            Topic: N16AT005

    Foil/air bearings have the benefit of negligible friction and wear once sufficient airflow is obtained; however, during spin up and spin down these bearings are subject to contact with the rotating surfaces upon which they act and thus are subject to frictional losses and wear. Modern air-cycle machines (ACMs) depend on solid lubricant based coating materials such as polyimide coatings to protect ...

    STTR Phase I 2016 Department of DefenseNavy
  3. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: OCEANIT LABORATORIES INC            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  4. Cyber Forensic Tool Kit for Machinery Control

    SBC: TDI TECHNOLOGIES INC            Topic: N16AT013

    The objective of STTR Topic N16A-T013, Cyber Forensic Tool Kit for Machinery Control, is to develop live digital forensics that, at run time, provide a cyber-protection strategy and aid in identification of malfunctions due to malicious and non-malicious events, while ensuring minimal impact on overall system performance. A proposal has been prepared by TDI Technologies, Inc., a small business bas ...

    STTR Phase I 2016 Department of DefenseNavy
  5. Computational Methods for Dynamic Scene Reconstruction

    SBC: NEAR EARTH AUTONOMY, INC            Topic: N16AT017

    Military and civilian agencies can benefit from systems that create 4D, spatio-temporal representations of dynamic scenes for target tracking, law enforcement, crowd control, disaster recovery, etc. Proliferation of imaging sensors such as surveillance cameras, car- and body-mounted cameras, and cell phones, provides the opportunity for reconstructing a dynamic scene in a very inexpensive way. Tod ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Embedded Space Analytics

    SBC: INFOBEYOND TECHNOLOGY LLC            Topic: N16AT020

    Navy needs a real-time graph embedding tool for analyzing huge graphs (millions of nodes and billions of edges) from diverse sources. However, current approaches cannot provide dynamic and scalable graph analytics to show the military value of tactical data. In this project, InfoBeyond advocates EStreaming (Embedding & Streaming) for scalable and efficient graph streaming. EStreaming promotes big ...

    STTR Phase I 2016 Department of DefenseNavy
  7. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE, INC.            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  8. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Multi-physics tool for predicting fatigue crack propagation using Phase field models

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: N16AT003

    Understanding fatigue crack initiation and propagation is critical for life-prediction of aircraft components which are exposed to complex loading conditions. Traditional approaches are based on analytical predictions of linear elastic fracture mechanics (LEFM), or numerical simulations using finite element/boundary element. All those methods have difficulties studying crack growth, and need compl ...

    STTR Phase I 2016 Department of DefenseNavy
  10. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: VEXTEC Corporation            Topic: N16AT004

    The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government