You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Exploiting Natural Products-Based Therapeutics for Aflatoxin Mitigation

    SBC: CFD Research Corporation            Topic: CBD152003

    Aflatoxins are a paradigm among fungal produced mycotoxins that are present in food supplies and are strongly associated with increased risk forthe development of hepatocellular carcinoma. Currently, there are no known countermeasures that can selectively mitigate aflatoxin toxicity andthe available options are only symptomatic treatments. To meet this challenge, we propose to harness the microbio ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  2. Ultra-Thin, Magnetic Polymer Membranes for the Selective Removal of Macronutrients in Wastewater

    SBC: Nanosonic Inc.            Topic: 15NCER05

    Phosphorous and nitrogen are valuable nutrients found in wastewater. The flow of phosphorous from rocks to the natural waterway has increased in recent years, due in large part to agricultural production. In addition to being a nutrient, phosphorous is a contaminant in aquatic environments that leads to the formation of organic material and algae. Recovery of phosphorous from wastewater will ensur ...

    SBIR Phase I 2016 Environmental Protection Agency
  3. Cost-effective Molecularly Imprinted Polymer Based Monitoring Technologies to Improve the Performance and Reliability of Small Drinking Water Systems

    SBC: SPORIAN MICROSYSTEMS INC            Topic: 14NCER4B

    Small drinking water systems consistently provide safe, reliable drinking water to their customers; however challenges of such systems include; lack of financial resources, aging infrastructure, lack of scale, and technical/logistical challenges associated with regulation compliance. The deployment ofnew cost-effective monitoring technologies hold opportunities to substantially advance infrastruct ...

    SBIR Phase II 2016 Environmental Protection Agency
  4. Isocyanate-Free Polyurethane Coating

    SBC: TDA Research, Inc.            Topic: 14NCER3B

    Polyurethanes are now made by reacting two components, one of which has toxic isocyanate groups. Isocyanates are especially hazardous to workers that spray-apply polyurethane paints. Researchers have developed less hazardous ways to make polyurethane, but they have poor performance, cure too slowly or are too expensive. In this project, TDA Research, Inc. (TDA) will develop new non-isocyanate two- ...

    SBIR Phase II 2016 Environmental Protection Agency
  5. Protective Mask Sizing App

    SBC: CFD Research Corporation            Topic: CBD161005

    Typical procedures for respirator masks sizing and protective fit test are time-consuming and user intensive, requiring taking anthropometric measurements of the wearer, sampling the wearers breathing zone and the use of specialized tools and equipment. The proposed software app aims to quickly, accurately and automatically perform respirator mask sizing and predict protective fit using only 2D im ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  6. Contaminated Material Encapsulation Technology for Transportation

    SBC: TDA Research, Inc.            Topic: CBD161006

    The United States Department of Defense (DOD) requires a container for the safe transportation of chemically or biologically contaminated materials, in accordance with DOD, federal and international standards.These materials must be packaged in a manner so that they arrive at their destination in good condition and without presenting a hazard to nearby persons during transport.The packaging requir ...

    SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  7. Large Format High Frame Rate X-ray Direct Detection With In-Pixel Analog Frame Storage

    SBC: BFE Acquisition Sub II, LLC            Topic: DTRA152002

    Coupling high intensity and high flux x-ray capabilities with impact drivers (lasers, gas guns, etc.) provide opportunity for directly probing material deformation mechanisms under extreme loading conditions. Limitations in existing x-ray detection capabilities prevent complete mapping of the temporal evolution of dynamic material events under fast loading rates. X-ray energy detection > 20 keV is ...

    SBIR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Expanded Development of RTIL Coatings for Protection Against CB Threats

    SBC: TDA Research, Inc.            Topic: CBD13101

    U.S. forces require the ability to protect personnel from an attack by chemical warfare (CW) agents. TDA Research, Inc. (TDA) is currently developing novel chemistry to mitigate the effects of CW agents. In this effort TDA will extend the development of a

    SBIR Phase II 2016 Department of DefenseOffice for Chemical and Biological Defense
  9. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  10. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: Matsys Incorporated            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government