You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD Research Corporation            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Program
  2. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  3. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
  4. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. System of Systems Control Interactions

    SBC: Torch Technologies, Inc.            Topic: MDA15T002

    Control Theory tools and processes for analyzing the interactions of complex System of Systems (SoS) are lacking, specifically when sub-systems are independently designed and/or higher levels of SoS controls are applied. Integrating these sub-systems into the SoS, can result in dynamic interactions between these sub-systems and the SoS controls resulting in unexpectedly large deviations between ex ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  6. System of Systems Control Interactions

    SBC: GTD Unlimited LLC            Topic: MDA15T002

    In this research effort, GTD Unlimited will design tools for efficiently specifying, representing, and analyzing the interactions between control systems in System of Systems (SoS). Our approach will be to model the problem as an uncertain system and analyze the resulting models using control methods. Control methods can be related back to the standard Nyquist criterion for stability, ensuring t ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  7. 3D-Printed Lightweight Optics for Directed Energy Systems

    SBC: Optimax Systems, Inc.            Topic: MDA13T009

    It is proposed that using additive manufacturing to fabricate a lightweight optic would result in a weight reduction of the optical system, since 3D-printing provides superior flexibility in the geometric design of the lightweight optic. In addition, the conventional approach to lightweight an optic requires machining of mechanically-hard optical substrates such as SiC, which is time-intensive an ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  8. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of stress related failure in microelectronics, which raises concerns about product reliability and specification. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a testing and physics based modeling protocol to correlate material properties and thermal loading conditio ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  9. Base Metal Electrode Capacitor Test Methods

    SBC: FUNDO SCIENCE CORPORATION            Topic: MDA14T003

    Miniaturized base metal electrodes (BME) multilayer ceramic capacitors (MLCC) are of great interest for future missile applications as designers are striving to achieve smaller, lighter, cheaper, faster and better electronic assemblies without sacrificing long-term performance. Unfortunately, screening, reliability and qualifications criteria are either not available or not standardized. In the ...

    STTR Phase I 2015 Department of DefenseMissile Defense Agency
  10. Micro-Particle Debris Characterization from Hyper-Velocity Impacts

    SBC: Torch Technologies, Inc.            Topic: MDA13T002

    Leveraging the results of our Phase I work, the Torch Team proposes to execute laboratory-based experiments to elucidate fundamental micro-debris formation mechanisms to improve optical modeling of impacts. Optical signatures from impacts collected over the last decade have identified definitive micro-debris parameter trends. However, current theories have difficulty reproducing these optical ob ...

    STTR Phase II 2015 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government