You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Prediction of Strutural Response and Fluid-Induced Vibration in Turbomachinery

    SBC: CFD RESEARCH CORPORATION            Topic: T102

    Advanced turbomachinery components play a critical role in launch vehicle and spacecraft liquid rocket propulsion systems. To achieve desired efficiencies, extremely tight tolerances are often imposed between inducer blades and shrouds or other system components which sets up strong interactions that influence both the aerodynamics and the structural performance of blades and vanes. These transien ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  2. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD RESEARCH CORPORATION            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  3. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD RESEARCH CORPORATION            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Agency
  4. In-Situ Spectroscopic Europa Explorer (ISEE)

    SBC: Honeybee Robotics, Ltd.            Topic: T803

    The US congress has instructed NASA to include a lander component in the next Europa mission. The mission has a target launch date of 2022, and its primary goal will be to search Europa?s icy surface for evidence of life that may persist within the ice shell or subsurface ocean. The Europa lander study specifically recommends a combination of a mass spectrometer and a Raman spectrometer to investi ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  5. Structural Nervous System

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T1201

    GTL?s SNS technology aids in the operation of new or existing structural health monitoring (SHM) systems by integrating data and power pathways into the structure. The use of this technology within a composite structure would allow engineers to place sensors from an SHM system directly where they are needed on a structure with instant power. GTL?s SNS technology offers the potential for developers ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  6. Development of an Advanced Diamond TEC Cathode

    SBC: IOP Technologies LLC            Topic: T603

    NASA recognizes the importance of conservation, smart utilization and reuse of resources for their deep space missions to address the need for regeneration of air, water and waste with highly reliable systems to reduce mission payload. Additionally, energy for life support and other systems needs to be obtained from renewable energy sources or waste streams. In order to address NASA's requirements ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  7. Active Radiation Shield

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T301

    DEC-Shield technology offers the means to generate electric power from cosmic radiation sources and fuse dissimilar systems and functionality into a structural component to create a Multi-functional Structure (MFS). DEC-Shield integrated into MFS technology can be used to generate electric power and provide radiation protection in a space vehicle; even maximizing that protection by spreading the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. Sustainable Water Purification

    SBC: STREAMLINE AUTOMATION LLC            Topic: T603

    Newly developed phase-engineered and low dimensional materials have opened the door to the design of materials structures that exhibit extremely efficient ionic transport. Recently, a new type of electro-filtration system designed to convert thermal power into purified water from salt water (or other ionic pollutants) has been demonstrated in the lab. The system is based on a bi-phasic nanoplate ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  9. Robotic ISRU Construction of Planetary Landing and Launch Pad

    SBC: Honeybee Robotics, Ltd.            Topic: T402

    The Apollo 15 Lunar Module rocket plume excavated regolith which sandblasted at speeds in excess of 1000 m/s the Surveyor 2 lander 200 m away. A Curiosity rover instrument was permanently damaged during SkyCrane landing on Mars. Any future human surface missions to planetary bodies covered in regolith (e.g. Mars, Moon) would need to address ejecta created during landing or takeoff. The intent of ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  10. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government