You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations

    SBC: CFD Research Corporation            Topic: DHP16A001

    Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...

    STTR Phase I 2016 Department of DefenseDefense Health Program
  2. High Hesitivity Magnetic Materials for Magnetic Toroid and Flat Dipole Antennas

    SBC: JEM ENGINEERING, LLC            Topic: N16AT001

    In our Phase I program, JEM and ASU will demonstrate a low cost manufacturing process to achieve the full theoretical hesitivity of a magnetic film that would enable greater effective hesitivity laminate. In Phase II we will develop a viable continuous process for two such materials to achieve light weight, low cost, and improved radiation efficiency; and we will seek to productize this process to ...

    STTR Phase I 2016 Department of DefenseNavy
  3. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: VEXTEC CORPORATION            Topic: N16AT004

    The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

    STTR Phase I 2016 Department of DefenseNavy
  4. Engineered DLC based Wear Resistant Coating For Extended Life Foil-Air Bearings

    SBC: NOKOMIS, INC            Topic: N16AT005

    Foil/air bearings have the benefit of negligible friction and wear once sufficient airflow is obtained; however, during spin up and spin down these bearings are subject to contact with the rotating surfaces upon which they act and thus are subject to frictional losses and wear. Modern air-cycle machines (ACMs) depend on solid lubricant based coating materials such as polyimide coatings to protect ...

    STTR Phase I 2016 Department of DefenseNavy
  5. Durable, Low Friction Coatings For Air Cycle Machine Foil Bearings

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: N16AT005

    Technology Assessment and Transfer will demonstrate the potential of novel, low friction and low wear coatings that are capable of providing long term durability for air cycle machine foil bearings. A systematic approach with a high probability of success includes the following: unique low friction, wear resistant alloys and lubricating ceramic composites, magnetron sputtering, the ideal method fo ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: Oceanit Laboratories, Inc.            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  7. Cyber Forensic Tool Kit for Machinery Control

    SBC: TDI Technologies, Inc            Topic: N16AT013

    The objective of STTR Topic N16A-T013, Cyber Forensic Tool Kit for Machinery Control, is to develop live digital forensics that, at run time, provide a cyber-protection strategy and aid in identification of malfunctions due to malicious and non-malicious events, while ensuring minimal impact on overall system performance. A proposal has been prepared by TDI Technologies, Inc., a small business bas ...

    STTR Phase I 2016 Department of DefenseNavy
  8. Cyber Forensic Tool Kit for Machinery Control

    SBC: INTELLIGENT AUTOMATION, INC.            Topic: N16AT013

    For machinery control systems, forensics is a vital part to provide a cyber-protection strategy and aid in identification and troubleshooting of system malfunctions due to malicious and non-malicious events. A number of unique challenges exist for the forensic analysis of SCADA based systems. Components of a SCADA system are often resource constrained. In addition, SCADA based systems have a criti ...

    STTR Phase I 2016 Department of DefenseNavy
  9. Computational Methods for Dynamic Scene Reconstruction

    SBC: Robotic Research LLC            Topic: N16AT017

    Reconstruction of dynamic scenes is at the limits of the state of the art. It is still challenging to accurately reconstruct models in static scenes. Dynamic scenes add a list of challenges that further complicate the problem:separating the dynamic objects from the motion created by the camera motionMorphological changes to the dynamic object itself. Not only is the system moving, but it is actual ...

    STTR Phase I 2016 Department of DefenseNavy
  10. Computational Methods for Dynamic Scene Reconstruction

    SBC: Near Earth Autonomy, Inc.            Topic: N16AT017

    Military and civilian agencies can benefit from systems that create 4D, spatio-temporal representations of dynamic scenes for target tracking, law enforcement, crowd control, disaster recovery, etc. Proliferation of imaging sensors such as surveillance cameras, car- and body-mounted cameras, and cell phones, provides the opportunity for reconstructing a dynamic scene in a very inexpensive way. Tod ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government