You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion during Early Lift-Off

    SBC: CFD Research Corporation            Topic: T102

    Launch vehicles experience extreme acoustic loads dominated by rocket exhaust plume interactions with ground structures during lift-off, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling the turbulent plume physics during early lift-off are too dissipative to accurately resolve the propag ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  2. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD Research Corporation            Topic: T102

    Solid rocket motor (SRM) design requires thorough understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag in ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  3. Prediction and Control of Selective Laser Melting Product Microstructure

    SBC: CFD Research Corporation            Topic: T1204

    Despite the rapid commercialization of additive manufacturing technology such as selective laser melting, SLM, there are gaps in models for material microstructure and property prediction that slow qualification and certification. Improvements in coupling microstructure prediction models to local process conditions, validation, and control of material microstructure are required to mature the stat ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  4. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD Research Corporation            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  5. Novel Mixed-mode TCAD-Commercial PDK Integrated Flow for Radiation Hardening By Design

    SBC: CFD Research Corporation            Topic: DTRA16A003

    Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...

    STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
  6. Composite Repair System

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T1202

    GTL has developed an innovative composite repair methodology known as the Composite Repair System (CRS). In this phase I effort, CRS is being developed for the repair of damaged induced in thin-laminate composite cryotanks. In applying CRS to damaged composite structures, the required level of structural capacity is recovered to within a predetermined percentage of its original performance after ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  7. Active Radiation Shield

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T301

    In the Phase I effort, Gloyer-Taylor Laboratories LLC (GTL) verified the feasibility of generating power from space particle radiation. This effort successfully demonstrated electrical power production from a particle radiation source using an initial proof-of-concept device. The effort also identified a second approach that has the potential for even better power generation and offers enhanced ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  8. Prediction of Strutural Response and Fluid-Induced Vibration in Turbomachinery

    SBC: CFD Research Corporation            Topic: T102

    Advanced turbomachinery components play a critical role in launch vehicle and spacecraft liquid rocket propulsion systems. To achieve desired efficiencies, extremely tight tolerances are often imposed between inducer blades and shrouds or other system components which sets up strong interactions that influence both the aerodynamics and the structural performance of blades and vanes. These transien ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  9. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD Research Corporation            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  10. Development of an Advanced Diamond TEC Cathode

    SBC: IOP Technologies LLC            Topic: T603

    NASA recognizes the importance of conservation, smart utilization and reuse of resources for their deep space missions to address the need for regeneration of air, water and waste with highly reliable systems to reduce mission payload. Additionally, energy for life support and other systems needs to be obtained from renewable energy sources or waste streams. In order to address NASA's requirements ...

    STTR Phase I 2016 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government