You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
-
Technologies for Rare Earths Enrichment of a Novel Low-Cost Raw Material
SBC: Physical Sciences Inc. Topic: OSD12T01A critical step in the extraction of elements from ore, especially rare earth elements that are found in complex minerals, is separation. Froth flotation is a highly versatile method for physically separating particles based on differences in the ability of air bubbles to selectively adhere to specific mineral surfaces in a mineral/water slurry. The particles with attached air bubbles are then ca ...
STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense -
Information Salience
SBC: DISCERNING TECHNOLOGIES, LLC Topic: OSD11TD1Empirical-based mathematical framework and computer algorithms, for representing human perception and cognition processes and limitations, which influence the recognition of salient information about rapidly changing events.
STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense -
Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications
SBC: GeneCapture, Inc. Topic: CBD15C001The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula
STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense -
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions
SBC: MAKEL ENGINEERING, INC. Topic: DTRA16A001This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Microscale Detector Materials for Covert, Ubiquitous Radiation Detector
SBC: Radiation Monitoring Devices, Inc. Topic: DTRA14B004The proliferation of nuclear and radiological weapons of mass destruction is a serious threat in the world today. The goal of this proposal is to develop a new, very low cost radiation detection technology that will be useful for detection and for surveillance of individuals who have been near radioactive materials. The technology can also be used for dosimetry, and will provide the technology for ...
STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency -
A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation
SBC: CFD Research Corporation Topic: DTRA14B004Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is critical to detect the proliferation of nuclear material. Critical challenges facing this objective include: (a) high sensitivity detection of signature emissions (e.g., gamma rays) from common radioactive isotopes behind shielding, and (b) cost-effe ...
STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency -
Use of Highly Porous Polymer Beads to Remove Anti-A and Anti-B Antibodies from Plasma for Transfusion
SBC: CytoSorbents Medical Inc. Topic: DHP15B001The ready availability of universal donor plasma to rapidly treat massively bleeding hospital trauma patients and warfighters with combat casualties is a key element of current recommendations for trauma resuscitation, yet universal AB donor plasma is rel
STTR Phase I 2016 Department of DefenseDefense Health Agency -
High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations
SBC: CFD Research Corporation Topic: DHP16A001Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...
STTR Phase I 2016 Department of DefenseDefense Health Agency -
Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes
SBC: Microelectronics Research Development Corporation Topic: DTRA16A003Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Large area, high efficiency, extremely light-weight portable neutron Detector
SBC: Triton Systems, Inc. Topic: DTRA14B005A drop-in 3He-tube replacement technology for thermal neutron detection does not exist today. It is critical for homeland security and nuclear safeguards applications. In this program, Triton Systems proposes to develop a light-weight, large-area, high efficiency portable neutron detector for passive interrogation using an innovative gas detector structure. The resulting 3He-free thermal neutron d ...
STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency