You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Lightweight, Stable Optical Bench with Integrated Vibration Attenuation
SBC: SAN DIEGO COMPOSITES, INC. Topic: MDA13T007The goal of this program is to design a lightweight optical bench capable of remaining stable under temperature and moisture changes, while isolating the precision optical array from vibrations such as engine noise and air turbulence. By integrating a customizable periodic stack in the bench, vibrations are attenuated more effectively than commercially available mounts. Additionally, the periodic ...
STTR Phase II 2016 Department of DefenseMissile Defense Agency -
Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)
SBC: NEXTGEN AERONAUTICS, INC. Topic: AF14AT01Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...
STTR Phase II 2016 Department of DefenseAir Force -
High Fidelity Computational Models for Aggregated Tissue Interaction in Surgical Simulations
SBC: CFD RESEARCH CORPORATION Topic: DHP16A001Surgical simulations aiming to support surgeon practices and medical education have attracted enormous research effort over the last two decades. However, the physical reality, especially on simulating aggregated tissue interaction, is still unsatisfactory. In this proposed work, an open source surgery simulation framework, SoFMIS, will be utilized and enhanced with tissue interaction models to a ...
STTR Phase I 2016 Department of DefenseDefense Health Agency -
Process diagnostics to quantify mechanical performance of AM parts
SBC: POLARONYX INC Topic: N16AT004This Navy STTR Phase I proposal presents an unprecedented NDI tool to quantify mechanical properties of metal parts made with laser additive manufacturing with material characteristics and process parameters. A fiber laser SAW and heterodyne detection is used with LIBS to study both in-process and post-process for both flat and shaped parts. It is the enabling technology for characterize the AM pa ...
STTR Phase I 2016 Department of DefenseNavy -
Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating
SBC: ACREE TECHNOLOGIES INCORPORATED Topic: N16AT005The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...
STTR Phase I 2016 Department of DefenseNavy -
Nanoporous block polymer separators for high performance and safe Li-ion batteries
SBC: ADA TECHNOLOGIES, INC. Topic: N16AT008To meet Navy needs for high performance and safe lithium ion (Li-ion) batteries for naval aircraft, ADA Technologies Inc. (ADA) and its university collaborator propose to develop and optimize tailor designed nanoporous separators derived from functionalized block copolymers (polyolefins) with low cost precursors. The innovative strategy provides a powerful tool to allow exquisite tuning of perform ...
STTR Phase I 2016 Department of DefenseNavy -
Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.
SBC: OCEANIT LABORATORIES INC Topic: N16AT008Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.
STTR Phase I 2016 Department of DefenseNavy -
Medium Voltage Direct Current (MVDC) Fault Detection, Localization, and Isolation
SBC: ISSAC Corp Topic: N16AT009The ISSAC Team leverages existing knowledge and expertise in power system monitoring, fault identification, localization and isolation in conjunction with rich, deep data analytics for pattern matching to devise a system for Medium Voltage Direct Current (MVDC) power system fault management. Because of the differences between AC and DC power grids there are a significant number of problems in deal ...
STTR Phase I 2016 Department of DefenseNavy -
Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction
SBC: RADIABEAM TECHNOLOGIES, LLC Topic: N16AT010The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...
STTR Phase I 2016 Department of DefenseNavy -
Fully Encapsulating Dielectrics for Gaseous Helium Cooled Superconducting CORC Power Cables
SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC Topic: N16AT011Future power systems on board Navy ships require electrical power in the order of 20 to 80 MW, which currently cant be provided by conventional copper or aluminum power cables. Advanced Conductor Technologies LLC (ACT) has been developing high-temperature superconducting Conductor on Round Core (CORC) power transmission cables, rated at 10 kA per phase, for the Navy that form a potential solution ...
STTR Phase I 2016 Department of DefenseNavy