You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Prediction of the Full-Scale Cook-off Response Based on Small-Scale Testing

    SBC: BLAZETECH CORPORATION            Topic: N10AT011

    Reducing the violence of Slow Cook-Off (SCO) and Fast Cook-Off (FCO) to acceptable levels is of great interest to the Insensitive Munitions development. For example, the MIL-STD-2105C SCO test for Insensitive Munitions (IM) compliance requires a slow heating rate (3.3°C/hr) until reaction occurs whereby the ensuing reaction is characterized by degree of violence. A Type V (burn) reaction or bette ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Novel Cooling System for Laser Enclosure

    SBC: PHOTONWARES CORP            Topic: N18AT001

    We propose to utilize a laser 3D printing manufacturing technique to realize an ultra high efficiency micro-channel laser head cooling system with high thermal load capacity in a small volume package. The new approach incorporates key technical innovations that drastically increase the forced water flow interaction surface area and the metal thermal conductivity. The approach enables conformal geo ...

    STTR Phase I 2018 Department of DefenseNavy
  3. Detection Rate Improvements Through Understanding and Modeling Ocean Variability

    SBC: Ocean Acoustical Services and Instrumentation Systems, Inc.            Topic: N18AT002

    The littoral environment is especially demanding on tactical sonar systems, in large part because the spatial and temporal variability imposes sonar system operating conditions of a nature and with a scale heretofore not encountered in the open oceans. Recent Office of Naval Research (ONR) sponsored basic research as well as fleet exercises have shown that littoral environments tactically importan ...

    STTR Phase I 2018 Department of DefenseNavy
  4. TOPMAST: Training Operational Performance via Measure Automation and Scenario-generation Technology

    SBC: APTIMA INC            Topic: N18AT003

    As the number of emerging warfare capabilities increases, adaptive training is required in order to keep pace with the corresponding increase in the scale and complexity of training regimes. To enable truly adaptive training, training systems need to both (1) automatically generate training scenarios and (2) automatically assess trainee performance. Lastly, (3) diagnostic visualization technologie ...

    STTR Phase I 2018 Department of DefenseNavy
  5. Next-Generation, Power-Electronics Materials for Naval Aviation Applications

    SBC: SIXPOINT MATERIALS, INC.            Topic: N18AT004

    This STTR project develops an innovative seed fabrication technology to address the fundamental size-quality limitation of gallium nitride (GaN) substratesthe indispensable key component for GaN-based vertical high-power devices. Currently, there is no viable GaN technology to realize large-area and low-defect substrates simultaneously. The technology producing 6" and larger GaN wafers results in ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Hot Filament CVD technology for disruptive, high-throughput SiC epitaxial growth reactors

    SBC: TRUENANO, INC.            Topic: N18AT004

    TrueNano, Inc. will in collaboration with the University of Colorado and industry partners, develop a novel single-wafer, high-throughput hot filament CDV reactor for the growth of high quality silicon carbide (SiC) epitaxial layers, suitable for the next generation of power electronic devices and systems. This includes the design and simulation of the reactor, the development of a throughput mode ...

    STTR Phase I 2018 Department of DefenseNavy
  7. Concrete Materials Characterization (COMAC)

    SBC: Luminit LLC            Topic: N18AT006

    To meet the U.S. Navy, specifically PMA-201, need for nondestructive evaluation (NDE) of concrete, including evaluating its strength, material properties, and damage localization, Luminit, LLC, and Southern Illinois University (SIU) propose to develop a novel Concrete Materials Characterization (COMAC) system, combining several methods of concrete characterization into a single sensor/software com ...

    STTR Phase I 2018 Department of DefenseNavy
  8. Non-Destructive Concrete Interrogator and Strength of Materials Correlator

    SBC: KARAGOZIAN & CASE, INC.            Topic: N18AT006

    Karagozian & Case Inc. and the University of Nebraska-Lincoln Department of Civil Engineering are proposing a Phase I STTR to develop a non-invasive and non-destructive methodology capable of measuring concrete material properties, including relevant spatial and statistical information associated with them, for input to hydrocode models. The solution will be both laboratory and field deployable, w ...

    STTR Phase I 2018 Department of DefenseNavy
  9. Additive manufacturing for Li-ion batteries

    SBC: PHYSICAL SCIENCES INC.            Topic: N18AT008

    Physical Sciences Inc. (PSI) will develop novel feedstocks for 3D printing of lithium-ion batteries using existing additive manufacturing technologies. Lithium-ion batteries simultaneously offering high energy and power density energy will be demonstrated using the novel feedstock materials. PSI’s proprietary HA coating technology will be utilized in the feedstock formulations to maximize active ...

    STTR Phase I 2018 Department of DefenseNavy
  10. Complete Lithium Ion Batteries Produced by Additive Manufacturing

    SBC: AKITA INNOVATIONS LLC            Topic: N18AT008

    Demand for portable power continues to expand, and new portable devices require increased variability in form factor. Furthermore, expired batteries may not be easily replaceable due to the lack of standard geometries. New manufacturing technologies are necessary to respond to each of the challenges. Additive manufacturing (AM) is a promising approach that is well known for its ability to quickly ...

    STTR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government