You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Second Generation Glass Fiber Composites Fabricated from Retired Wind Turbine Blades

    SBC: Carbon Rivers LLC            Topic: 15c

    Glass fiber is the most common reinforcement material for all polymer composites (a $43.93 billion dollar market in 2017), including all wind turbine blades of which it’s estimated there will be over 4.8 million tonnes of by 2050. However, there exists no economical method of handling these composites once they reach end of life, meaning they are all currently destined for the landfill. For wind ...

    STTR Phase I 2019 Department of Energy
  2. A Mesh Free Framework for Mechanical Simulations of Microstructure Data Files

    SBC: CFD Research Corporation            Topic: 07a

    The Exascale Computing Project is tasked to develop the next generation of high performance computing systems capable of computing at 50 to 100 times faster than current HPC systems. Computing at this extreme-scale will significantly enhance the value of materials modeling and simulation to basic materials research and engineering In particular, computing at the extreme scale will enable a higher ...

    STTR Phase I 2019 Department of Energy
  3. A Multi-physics Analysis Capability for Engine Materials

    SBC: Sunergolab Inc.            Topic: 03b

    Computer-aided Engineering software that apply the Finite Element Method to perform a multi-physics analysis have received widespread acceptance for traditional macro-scale material systems. Challenges persist in the modeling of complex coupled processes in environmental/thermal barrier coatings (E/TBCs) used to protect substrate material against the corrosive environment in the hot section parts ...

    STTR Phase I 2019 Department of Energy
  4. Functionalized Composite Nanofiber Membranes for Electrochemical Applications

    SBC: OCEANIT LABORATORIES INC            Topic: 19a

    The separator is a critical component of the battery that impacts both performance and safety. Separator technology is lagging in innovation comparison to cathode/anode chemistries. Current SOTA polyolefin (PO) separator technology is an antique utilizing traditional materials and processes. Moreover, investments in separator development (ARRA & DOE) have been focused on improving the manufacturin ...

    STTR Phase I 2019 Department of Energy
  5. Very High Field Hybrid Superconducting Magnet Using Bi-2212

    SBC: Cryomagnetics, Inc.            Topic: 26b

    Hig e and advanced materials are continually demanding higher magnetic fields. Efforts to generate fields in excess of 25 Tesla have been a principal driver of high temperature superconductor research. Although HTS materials were discovered decades ago and have always shown significant potential for high field use, until recently magnets using the technology have remained elusive. Great progress h ...

    STTR Phase I 2018 Department of Energy
  6. Development of breeding strategies for Nitzschia sp.

    SBC: GLOBAL ALGAE INNOVATIONS, INC.            Topic: 08c

    Renewable algae fuels are the source of energy for the future. It was demonstrated that algae fuels can be produced and they were successfully used in demonstration airplane flights and cars. The cost of algae oil is still high and cannot compete with fossil fuels. High algae growth and ability to accumulate oil fast are the key factors that will make algae based biofuels affordable. Diatoms are t ...

    STTR Phase I 2018 Department of Energy
  7. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD Research Corporation            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens,whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial andalphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable and ...

    STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  8. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL, INC.            Topic: 08a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. Therefore, a number of new large neutron facilities have recently being constructed, upgraded or planned around the world. Examples include the new, 1.4 billion-dollars Spallation Neutron Source (SNS) at DoE’s Oak Ridge National Laboratory (ORNL) and upgrades of ORNL’s High-Flux Isotope React ...

    STTR Phase I 2017 Department of Energy
  9. Hardening of the Peridigm Peridynamics Software for Industry Use

    SBC: Sunergolab Inc.            Topic: 02b

    Existing research and commercial software that apply the Finite Element Method to solve the equations of classical continuum mechanics have received widespread acceptance for structural analysis of traditional macroscale materials. Challenges persist in the modeling of complex phenomena in new advanced materials with heterogeneous structure. Such materials can revolutionize the aerospace and autom ...

    STTR Phase I 2017 Department of Energy
  10. Novel Mixed-mode TCAD-Commercial PDK Integrated Flow for Radiation Hardening By Design

    SBC: CFD Research Corporation            Topic: DTRA16A003

    Cost-effective application of advanced commercial electronics technologies in DoD space systems requires early development of radiation-hardened-by-design (RHBD) techniques, and use of simulations is critical to the efficiency of this process. CFDRC has developed an integrated, mixed-mode simulation approach allowing their NanoTCAD device physics simulator to interface with commercial circuit simu ...

    STTR Phase I 2017 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government