You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Vertical GaN Substrates

    SBC: SIXPOINT MATERIALS, INC.            Topic: DEFOA0000941

    SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...

    STTR Phase II 2017 Department of EnergyARPA-E
  2. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: VIBRANT CORP            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect substandard, counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor ...

    STTR Phase II 2017 Department of DefenseDefense Logistics Agency
  3. Tunable Active HEterodyne Terahertz Imager (TAHETI)

    SBC: LONGWAVE PHOTONICS LLC            Topic: A17AT007

    LongWave Photonics, Massachusetts Institute of Technology and Virginia Diodes are proposing the use of the Terahertz Quantum-Cascade Lasers (QCL) combined with a Schottky diode detector for high dynamic range heterodyne imaging. Two single-mode, distributed feedback (DFB) QCLs with milliwatt power levels will be used as local oscillator and illumination for imaging. The QCLs will be downconverte ...

    STTR Phase I 2017 Department of DefenseArmy
  4. 3D Tomographic Scanning Microwave Microscopy with Nanometer Resolution

    SBC: Alcatera Inc.            Topic: A17AT008

    Near-Field Scanning Microwave Microscopy (SMM) is a technique relying on a raster scan of a microwave probe across a sample surface, while measuring its reflected microwave signal. The existing technologies are limited to the surface analysis, and are not compatible with liquid environment. These limitations are addressed by the proposed wideband 3D tomography SMM with sub-surface analysis capabil ...

    STTR Phase I 2017 Department of DefenseArmy
  5. Developing a Clostridium molecular toolkit for bioconversion of food waste

    SBC: SYNVITROBIO, INC.            Topic: A17AT011

    Waste generation at forward bases creates significant challenges; its disposal presents an economic cost with no direct benefit and its accumulation or burning is a health hazard. The bioconversion of waste into useful compounds could save thousands annually for every soldier and tens of millions in capital expenditure. However, widespread adoption is impeded by low conversion efficiency. We propo ...

    STTR Phase I 2017 Department of DefenseArmy
  6. High Performance Armor via Additive Advanced Ceramics

    SBC: HOTEND WORKS, INC.            Topic: A17AT012

    The objective of this proposal is to investigate the use of a cutting edge Additive Manufacturing technology that uses a unique deposition architecture developed by HotEnd Works, Inc (HeW). The process allows for use and flexibility of many advanced material components such as alumina ceramics, boron carbide and silcon carbide. This proposal will explore how In previous work it was determined ...

    STTR Phase I 2017 Department of DefenseArmy
  7. In Theater Additive Manufacturing of Ceramic Armor for Dismounted Soldiers and Structures

    SBC: GOODMAN TECHNOLOGIES LLC            Topic: A17AT012

    Goodman Technologies LLC (GTL) in partnership with Robocasting Enterprises LLC (a Small Business spin-off from Sandia National Laboratories technology transfer program) and the University of Hawaii at Manoa, (UHM, a Minority Institution) propose to demonstrate the Robocasting process for 3D printing alumina (Al2O3), boron carbide (B4C), and silicon carbide (SiC) advanced ceramic materials. Using ...

    STTR Phase I 2017 Department of DefenseArmy
  8. Biosensor for Detection of Synthetic Cannabinoids

    SBC: NANOCOMPOSIX, INC.            Topic: A17AT014

    Recreational drug use by military personnel can impact soldier preparedness and performance especially in difficult and demanding environments. One challenge for monitoring illicit drug use is that current tests rely on the identification of specific chemical structures. Small variants in the chemistry of a drug can evade detection. In this Phase I SBIR, we will develop a lateral flow test that ...

    STTR Phase I 2017 Department of DefenseArmy
  9. Method for Locally Measuring Strength of a Polymer-Inorganic Interface During Cure and Aging

    SBC: SURFORCE, LLC            Topic: A17AT016

    Achieving strong and durable polymer adhesion to inorganic substrates under various environmental conditions is challenging. The required long-term durability tests are over long time- and length-scales, beyond the capability of current modeling, and extensive experimental testing is needed. Currently, no commercially available method exists for monitoring how a polymer/substrate system evolves du ...

    STTR Phase I 2017 Department of DefenseArmy
  10. Two-color Infrared Laser Arrays for Scene Projection

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A17AT018

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (> 1Kx1K), response time < 1 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid crystals, and photonic crystals all suffer in one or more areas. MEMS suffer from flicker and low dynamic range. Resistor arrays suffer from low frame ...

    STTR Phase I 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government