You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Broadband and Compact Dual Comb Spectrometer for Precise Field Detection of Trace Elements and Chemicals

    SBC: OPTICSLAH, LLC            Topic: DTRA20B003

    There is a growing need to accurately characterize nuclear materials not only for nuclear safeguards and nonproliferation treaty verification but also for forensics and provenance. Presently, nuclear material identification requires samples to be collected and sent to laboratories for analysis using large and expensive equipment, such as inductively coupled plasma mass spectrometers (ICP-MS) or se ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  2. Integrated Circuits

    SBC: NU TREK INC            Topic: DTRA20B002

    The Nu-Trek team is proposing to develop µDet, a low Size, Weight, and Power (SWaP) read out integrated circuit (IC) for gamma and neuron detectors. µDet offers pulse shape digitization, which in turn enables gamma-neutron discrimination. This is a game changing capability that brings laboratory-level functionality to the field. In Phase I the Nu-Trek Team will develop a baseline design for the ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  3. Computer Vision Image Interpretation for 3D Model Reconstruction

    SBC: TOYON RESEARCH CORPORATION            Topic: DTRA18B001

    Toyon Research Corporation (Toyon) and the University of California, Santa Barbara (UCSB) propose research, development, and demonstration of algorithms and an efficient software prototype for 3D model reconstruction using single images collected via remote sensing. In particular, the effort is focused on processing of high-resolution commercial satellite images for 3D reconstruction of buildings. ...

    STTR Phase II 2021 Department of DefenseDefense Threat Reduction Agency
  4. Eye-readable Solution-based Dye Displacement Probe for Large-area Detection of Opioids

    SBC: Intelligent Optical Systems, Inc.            Topic: CBD20AT001

    Intelligent Optical Systems, Inc., in collaboration with Bowling Green State University, proposes to develop a field-rugged, eye-readable indicating spray solution that can immediately detect synthetic opioids over a large area of contamination (i.e., military vehicles, individual protective equipment, clandestine labs, etc.). The proposed chemosensor in a spray solution format will detect multipl ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  5. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  6. Compact Laser Drivers for Photoconductive Semiconductor Switches

    SBC: ASR Corporation            Topic: DTRA16A004

    A compact laser driver will allow photoconductive semiconductor switches to be used in small EMP simulator "building blocks" (EMPBB). Combined with a battery powered on-board pulsed power system, these EMPBBs will allow the construction of flexible EMP test facilities with nothing more than a single fiber optic timing connection to each EMPBB.

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: Scientific Applications & Research Associates, Inc.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government