Award Data

Quantum Cascade Lasers (QCLs) are one of the most versatile sources of radiation in the mid-infrared range and have found applications in a variety of fields. Despite their widespread adoption, one of the main hurdles holding QCLs back from large volume manufacturing is the large cost of ownership. While QCLs, like most semiconductor devices based on III-V compounds, can leverage the economies of ...

Despite their widespread adoption, one of the main hurdles holding QCLs back from large volume manufacturing is the large cost of ownership. While QCLs, like most semiconductor devices based on III-V compounds, can leverage the economies of scale typical of semiconductor manufacturing, and therefore lower production cost at wafer and chip level, it is at the testing and packaging stages of QCL pro ...

The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

Under this STTR solicitation N20B-T028, the goal is to build on the strengths of HyPerComp’s development in the HDphysics suite of tools to meet NAVAIR’s requirements in solving large-scale problems in electromagnetics.  One area that will receive a major attention in this effort is the development of high order curved meshes for arbitrary geometries with small- and large-scale features that ...

The capability to model large-scale problems in electromagnetics (problem sizes extending to thousands of wavelengths) using physics-based full wave solvers that employ high-fidelity geometric models and high- order accurate numerical algorithms is a critical technology for several aspects of the DoD warfighter mission.  In particular, a robust and computationally efficient computational electrom ...

In hypersonic flight, airborne particles such as water or ice can penetrate and alter the bow shock and flow field, enhance erosion mechanisms and alter aerodynamics. Particles break up as they pass through the shock wave, impact the surface, erode and increase surface roughness, increase turbulence and heat transfer, and augment heating that can destroy heat shields prematurely. Many tests and th ...

RIPACS will provide a novel capability for small UAVs, specifically Group 4 5 vehicles such as the MQ8 Fire Scout, extending their autonomy from pre mission planning through to landing. Being able to fly through a series of waypoints is a well established capability, but human operators are required to layout plans, update plans based on incoming data and react to contingencies.  Requiring humans ...

This proposal describes an all optical fixed wing landing system for a aircraft carrier capable of flying an aircraft all the way to landing in a RF denied environment. The precision, reliability and accuracy of this system will allow control the aircraft without the help from the pilot all the way to touch down. It will work seamlessly with UAVs and manned aircraft that have been retrofitted with ...

This research will show how data-capable laser communication retro-reflectors integrated with multispectral image processing can provide extreme reliability positioning suitable for full time automatic landing aboard ship of piloted fixed wing aircraft. The positioning system supports the SALRS long-term objective to reduce or eliminate pilot training to perform manual landing aboard ship includin ...

The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...