You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of novel wound dressing technology combining advanced hydrogel and perfusion enhancement technologies.

    SBC: Perfuzia Medical            Topic: A14AT016

    Complex wounds including traumatic, chemical, chronic or surgical wounds present a significant challenge to care givers. Wound healing, being a complex and multifaceted process, differs significantly based on the type of wound and the underlining health of the patient. It is well established that factors like impaired perfusion, infection, existence of metabolic disorders such as diabetes, bad nut ...

    STTR Phase I 2015 Department of DefenseArmy
  2. Multiple Hit Performance of Small Arms Protective Armor

    SBC: TRANSPARENT ARMOR SOLUTIONS INC.            Topic: A14AT017

    This proposal will investigate body armor systems to the effects of burst fire. In Phase I, the team of researchers will investigate the spatial distribution of impacts of common burst fire capable rifles, demonstrate a statistical analysis technique, and demonstrate a ballistic model approach while applying this research to a surrogate body armor solution. The program will begin with an analysi ...

    STTR Phase I 2015 Department of DefenseArmy
  3. Printed, Flexible Ultracapacitors Based on Novel, High-Performance Carbon Nanomaterials (1000-298)

    SBC: SI2 TECHNOLOGIES, INC            Topic: A13AT003

    SI2 Technologies, Inc. (SI2) and Drexel University propose to develop printed, flexible, high-performance ultracapacitors to meet the Armys need for lightweight energy storage. SI2 will leverage its demonstrated expertise in ink jet printing and Drexels expertise with carbon nanoparticle synthesis. SI2 has considerable experience in the roll-to-roll deposition of conductive ink patterns. These ...

    STTR Phase II 2015 Department of DefenseArmy
  4. Conformal Passivation of High Aspect Ratio HgCdTe Surfaces by ALD Using a Novel Cd-Precursor

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: A13AT013

    "HgCdTe is the material of choice for high performance infrared red focal plane arrays (IRFPA) used in militarys night vision systems. One of the major problems IRFPA manufacturers face is the ineffective passivation of the highly reticulated HgCdTe detector surfaces, which results in poor performance. Furthermore, newly evolved FPA technology requires the creation of much challenging high-aspect ...

    STTR Phase II 2015 Department of DefenseArmy
  5. Low Power Monolayer MoS2 Transistors for RF Applications

    SBC: APPLIED NOVEL DEVICES, INC.            Topic: A14AT008

    In Phase II we propose to optimize wafer scale MoS2 deposition process to fabricate uniform large area monolayer and multi-layer MoS2 films and analyze the defects on these films. Monolayer regions that can result in device periphery larger than 50m will be targeted. Further, the charge transfer doping process using TiOx will be optimized for MoS2 multi-layer and RF transistors will be fabrication ...

    STTR Phase II 2015 Department of DefenseArmy
  6. Pathogen Specific Antimicrobial Coatings For Fabrics

    SBC: GINER INC            Topic: A14AT012

    Antimicrobial treatment of military textile systems is intended to provide enhanced protection to the Warfighter in the field by preventing colonization of harmful bacteria that cause problems such as odor, dermatitis, impetigo, cellulitis, and other skin irritations. Current treatments can impart antimicrobial functionality to textiles; however, they all possess broad-spectrum antimicrobial activ ...

    STTR Phase II 2015 Department of DefenseArmy
  7. Ultra-Coherent Semiconductor Laser Technology

    SBC: TELARIS INC            Topic: A14AT005

    Spontaneous emission is a quantum mechanical process that represents the main source of phase noise in state-of-the-art semiconductor lasers, limiting their coherence, and their suitability for high-speed communication and sensing applications. This proposal aims to develop ultra-high coherence semiconductor lasers on the Silicon/III-V platform with a quantum linewidth of

    STTR Phase II 2015 Department of DefenseArmy
  8. Technologies for Rare Earths Enrichment of a Novel Low-Cost Raw Material

    SBC: PHYSICAL SCIENCES INC.            Topic: OSD12T01

    A critical step in the extraction of elements from ore, especially rare earth elements that are found in complex minerals, is separation. Froth flotation is a highly versatile method for physically separating particles based on differences in the ability of air bubbles to selectively adhere to specific mineral surfaces in a mineral/water slurry. The particles with attached air bubbles are then ca ...

    STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  9. Information Salience

    SBC: DISCERNING TECHNOLOGIES, LLC            Topic: OSD11TD1

    Empirical-based mathematical framework and computer algorithms, for representing human perception and cognition processes and limitations, which influence the recognition of salient information about rapidly changing events.

    STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  10. Recovery of Rhenium from Superalloy Scrap

    SBC: LYNNTECH INC.            Topic: OSD12T04

    Due to the limited amount of rhenium present in the earths crust (approximately 1-2 part per billion) there is a significant benefit to be realized in recovering for reuse the rhenium from scrap material, spent catalysts, or end-of-life superalloys. Rhenium is found in molybdenum-copper porphyry deposits. If rhenium is present in ore that is processed, it will show up in the resulting molybdenum ...

    STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government