You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  2. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: Intelligent Optical Systems, Inc.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  3. NAVAL INTEGRATED FIRE CONTROL COUNTER AIR (NIFC-CA)

    SBC: APTIMA INC            Topic: N09T007

    The Navy faces a significant challenge to its dominance of sea and air given the Anti-Access Area-Denial (A2AD) capabilities of major powers. The Navy's response, in part, is to implement technical capabilities that enable platforms to coordinate in new ways to execute offensive and defensive actions at very long range. While the Navy finalizes this Naval Integrated Fire Control-Counter Air (NIFC- ...

    STTR Phase II 2016 Department of DefenseNavy
  4. Wearable Neurophysiological Monitoring Device for Circadian Rhythm Assessment and Intervention

    SBC: Cognionics, Inc.            Topic: A16AT014

    This Phase I STTR project will develop a platform to demonstrate high-quality, multi-modal acquisition of neurophysiological signals, including EEG, heart rate/blood oxygenation via photoplethysmography (PPG), electrodermal (EDA) activity, temperature plus environmental factors such as ambient light and sound in a simple, wearable headband. The hardware will be coupled with the development of a cl ...

    STTR Phase I 2016 Department of DefenseArmy
  5. Hybrid Battery/Supercapacitor Energy Storage Device

    SBC: ADA TECHNOLOGIES, INC.            Topic: A15AT010

    ADA Technologies, Inc. (ADA) and Dr. Massoud Pedram at the University of Southern California (USC) have successfully completed a Phase I STTR effort for the development of a lithium ion (Li-ion)/ supercapacitor hybrid electrical energy storage system (HEESS) to afford pulse power characteristics (projected ~10 kW/kg) in a high energy system (100-150 Wh/kg). The system is enabled via a constant cur ...

    STTR Phase II 2016 Department of DefenseArmy
  6. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV Systems, LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Infrared Light Emitting Arrays for Target Image Projection

    SBC: ATTOLLO ENGINEERING, LLC            Topic: AF16AT22

    Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid cr...

    STTR Phase I 2016 Department of DefenseAir Force
  8. Validation Experiments to Measure Transient Aerothermoelastic Response of a Curved Panel to Hypersonic Flows

    SBC: Metrolaser, Inc.            Topic: AF16AT24

    An experiment to obtain validation data on the transient aerothermoelastic response of a curved panel in hypersonic flows will be designed and evaluated for its feasibility. Significant challenges must be overcome for a successful experimental campaign i...

    STTR Phase I 2016 Department of DefenseAir Force
  9. Hypersonic Experimental Aerothermoelastic Test (HEAT)

    SBC: Global Aerospace Corporation            Topic: AF16AT24

    The Air Force is interested in developing technology that would enable long duration hypersonic flight with reusable aircraft. Hypersonic flow presents many design challenges that can be encapsulated into an aerothermoelastic problem, i.e., a complex dyn...

    STTR Phase I 2016 Department of DefenseAir Force
  10. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: NESS ENGINEERING, INC.            Topic: A14AT004

    The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...

    STTR Phase II 2016 Department of DefenseArmy
US Flag An Official Website of the United States Government