You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  2. Enabling Technology- Reducing Greenhouse Gas Emissions and Energy Demands in the Meat Production Industry via Scaling Advanced 3D Culture Bioreactors

    SBC: Cambridge Crops, Inc.            Topic: G

    Food production, and in particular animal-derived meat products, are a major source of green-house gases, compounded by the remarkable inefficiency in biomass conversion (grain to dense muscle tissue in meat), along with growing challenges with food safety, quality and nutrition. To address this growing problem, we propose to exploit the emerging field of cellular agriculture (tissue engineering o ...

    STTR Phase I 2020 Department of EnergyARPA-E
  3. Enabling Technology- Reducing Greenhouse Gas Emissions and Energy Demands in the Meat Production Industry via Scaling Advanced 3D Culture Bioreactors

    SBC: Cambridge Crops, Inc.            Topic: G

    Food production, and in particular animal-derived meat products, are a major source of green-house gases, compounded by the remarkable inefficiency in biomass conversion (grain to dense muscle tissue in meat), along with growing challenges with food safety, quality and nutrition. To address this growing problem, we propose to exploit the emerging field of cellular agriculture (tissue engineering o ...

    STTR Phase II 2020 Department of EnergyARPA-E
  4. Flexible Low Temperature CO2 Capture System, E-CACHYS

    SBC: ENVERGEX LLC            Topic: 1

    This project focuses on the design, integration and optimization of a flexible natural gas combined cycle plant with carbon capture, capable of operating in a highly variable renewable energy environment. Renewable energy sources such as wind and solar power offer unique solutions in our quest to reduce global carbon dioxide (CO2) emissions. However, the increasing penetration of these high variab ...

    STTR Phase I 2020 Department of EnergyARPA-E
  5. Flexible Low Temperature CO2 Capture System, E-CACHYS

    SBC: ENVERGEX LLC            Topic: 1

    This project focuses on the design, integration and optimization of a flexible natural gas combined cycle plant with carbon capture, capable of operating in a highly variable renewable energy environment. Renewable energy sources such as wind and solar power offer unique solutions in our quest to reduce global carbon dioxide (CO2) emissions. However, the increasing penetration of these high variab ...

    STTR Phase II 2020 Department of EnergyARPA-E
  6. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Hardened, Optically-Based Temperature Characterization of Detonation Environments

    SBC: SA Photonics, Inc.            Topic: DTRA19B001

    Improving the effectiveness of counter-WMD operations requires improved understanding of weapon-target interaction. Specifically, time-resolved measurements of temperature and composition are required to allow temporal evolution of a detonation fireball. To address this need, SA Photonics will develop MONITOR, a laser-based temperature diagnostic that will enable wide dynamic range temperature mea ...

    STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency
  8. High Energy Resolution Mixed-Halide Elpasolite Scintillators for Next Generation RIID

    SBC: CapeSym, Inc            Topic: DTRA18B003

    The ability to discriminate between threatening and benign sources depends on the sensitivity, accuracy, and identification speed of the detection equipment. High energy resolution of the radionuclide sensor is necessary to decrease the likelihood of false identification. However, few scintillators achieve better than 3% energy resolution at 662 keV, and none exceed 2.5%. The goal of this effort i ...

    STTR Phase II 2020 Department of DefenseDefense Threat Reduction Agency
  9. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Large area, high efficiency, extremely light-weight portable neutron Detector

    SBC: Triton Systems, Inc.            Topic: DTRA14B005

    A drop-in 3He-tube replacement technology for thermal neutron detection does not exist today. It is critical for homeland security and nuclear safeguards applications. In this program, Triton Systems proposes to develop a light-weight, large-area, high efficiency portable neutron detector for passive interrogation using an innovative gas detector structure. The resulting 3He-free thermal neutron d ...

    STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government