You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Compressive Sensing Flash IR 3D Imager

    SBC: Physical Sciences Inc.            Topic: A15AT007

    Physical Sciences Inc. in collaboration with Colorado State University proposes to develop a compact infrared flash 3D imaging sensor employing compressive sensing (CS) approaches. The CS 3D sensor offers a combination of high range resolution (10 cm), high point cloud density (6464 format), and fast 3D image frame rates (10 Hz) in a low cost, compact form factor employing commercial off the shelf ...

    STTR Phase II 2016 Department of DefenseArmy
  2. Conformal Passivation of High Aspect Ratio HgCdTe Surfaces by ALD Using a Novel Cd-Precursor

    SBC: Radiation Monitoring Devices, Inc.            Topic: A13AT013

    "HgCdTe is the material of choice for high performance infrared red focal plane arrays (IRFPA) used in militarys night vision systems. One of the major problems IRFPA manufacturers face is the ineffective passivation of the highly reticulated HgCdTe detector surfaces, which results in poor performance. Furthermore, newly evolved FPA technology requires the creation of much challenging high-aspect ...

    STTR Phase II 2015 Department of DefenseArmy
  3. Electronically Tunable High-Power Infrared Lasers for Standoff Detection Applications

    SBC: Pranalytica, Inc.            Topic: A14AT015

    In response to the Army STTR Topic A14A-T015 solicitation for tunable high-power LWIR lasers for standoff detection applications, Pranalytica proposed to develop a compact, rugged and highly reliable wavelength tunable quantum cascade laser (QCL) module delivering over 5W of peak power and over 0.5W of average power in the spectral region spanning from 7 to 11m. The proposed approach is based on a ...

    STTR Phase II 2016 Department of DefenseArmy
  4. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: Eureka Aerospace            Topic: A14AT004

    This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...

    STTR Phase II 2016 Department of DefenseArmy
  5. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: Ness Engineering, Inc.            Topic: A14AT004

    The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...

    STTR Phase II 2016 Department of DefenseArmy
  6. Mobile Health Application for Family and Behavioral Health Provider Communication

    SBC: INFERLINK CORPORATION            Topic: A13AT018

    Clinical monitoring of mental health status has not evolved much from the routine meeting between patient and clinician, which suffers from a lack of quantification, irregular and anecdotal reporting, and does not necessarily include input from family. This is unfortunate given current technology, in which people routinely volunteer to track their own health related behavior, such as exercise and ...

    STTR Phase II 2015 Department of DefenseArmy
  7. Parallel Two-Electron Reduced Density Matrix Based Electronic Structure Software for Highly Correlated Molecules and Materials

    SBC: Q-CHEM, INC.            Topic: A14AT013

    Variational two-electron reduced-density-matrix (v2RDM) methods can provide a reference-independent description of the electronic structure of many-electron systems that naturally captures multireference correlation effects. These methods offer one of the few possible routes to performing the large-active-space computations that are necessary for the qualitative description of strongly-correlated ...

    STTR Phase II 2016 Department of DefenseArmy
  8. Pathogen Specific Antimicrobial Coatings For Fabrics

    SBC: Giner, Inc.            Topic: A14AT012

    Antimicrobial treatment of military textile systems is intended to provide enhanced protection to the Warfighter in the field by preventing colonization of harmful bacteria that cause problems such as odor, dermatitis, impetigo, cellulitis, and other skin irritations. Current treatments can impart antimicrobial functionality to textiles; however, they all possess broad-spectrum antimicrobial activ ...

    STTR Phase II 2015 Department of DefenseArmy
  9. Printed, Flexible Ultracapacitors Based on Novel, High-Performance Carbon Nanomaterials (1000-298)

    SBC: SI2 TECHNOLOGIES, INC.            Topic: A13AT003

    SI2 Technologies, Inc. (SI2) and Drexel University propose to develop printed, flexible, high-performance ultracapacitors to meet the Armys need for lightweight energy storage. SI2 will leverage its demonstrated expertise in ink jet printing and Drexels expertise with carbon nanoparticle synthesis. SI2 has considerable experience in the roll-to-roll deposition of conductive ink patterns. These ...

    STTR Phase II 2015 Department of DefenseArmy
  10. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
US Flag An Official Website of the United States Government