You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Coversion of waste water treatment plant fats oils and greases "brown grease" into bio diesel using supercitical fluids and robust catalyst processes./ Same as LOI on headers

    SBC: CF Technologies, Inc.            Topic: 10

    The Department of Energy has a mission to ensure America's prosperity and security by addressing energy and environmental challenges. This Phase I project aims to produce domestic, economic and environmentally responsible biodiesel fuel from brown grease, a waste that is currently disposed in landfills or incinerated. The conversion of "brown grease" from wastewater treatment plant’s fats oils a ...

    STTR Phase I 2016 Department of Energy
  2. Organic-Inorganic Hybrid Nanocomposite as Radiation-resistant Electrical Insulator

    SBC: Innosense Llc            Topic: 20

    The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...

    STTR Phase I 2016 Department of Energy
  3. High Gradient Accelerating Structure for Low Energy Protons

    SBC: RadiaBeam Systems, LLC            Topic: 25

    Currently, the most promising types of radiotherapy is proton or carbon therapy, as they have demonstrated significant improvements in clinical efficiency and reduced toxicity profiles. Unfortunately, the high cost of treatments using both proton and carbon beams is the limiting factor preventing hadron therapy from becoming the standard of care for a wider range of cancers. Designing a linear acc ...

    STTR Phase I 2016 Department of Energy
  4. High power, magnet-free, circulator using angular-momentum biasing of a resonant ring

    SBC: Calabazas Creek Research, Inc.            Topic: 25

    There is a continuing need for high power circulators to protect the next generation of high power RF sources from waveguide reflections that can destroy the device. Currently, the power level of circulators is limited by the materials, specifically ferrites that provide the required non-reciprocal operation. New approaches are required that use materials capable of very high power operation. Stat ...

    STTR Phase I 2016 Department of Energy
  5. Membranes and Materials for Energy Efficiency- Subtopic d) Other. Title: Polysulfide-Blocking Polymer Membrane Separators for Rechargeable Lithium-Sulfur Batteries

    SBC: Sepion Technologies            Topic: 12a

    Renewable sources of energy including solar and wind are fast gaining ground on fossil fuels, in part because of their sustainability and environmental benefits. A major issue, however, has been finding efficient ways to store the energy that renewables generate for use when the demand for energy is high. Lithium-­‐sulfur batteries, which store electrical energy by transferring electrons to or ...

    STTR Phase I 2016 Department of Energy
  6. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Development of Low Cost Magnetocaloric Nanomaterials for Sub 80oK Refrigeration Applications

    SBC: GENERAL ENGINEERING & RESEARCH, L.L.C.            Topic: 12

    Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

    STTR Phase I 2016 Department of Energy
  8. Mitigation of Aerosol Emissions from Solvent-based Post-Combustion CO2 Capture Systems

    SBC: ENVERGEX LLC            Topic: 18

    Reactive absorption-based carbon dioxide capture processes using solvents is the preferred technology for large scale capture of carbon dioxide in flue gases from coal-fired power plants. This Small Business Innovation Research project targets the development of mitigation strategies to decrease the quantity of aerosols that are formed from such post-combustion capture systems in the presence of s ...

    STTR Phase I 2016 Department of Energy
  9. Mechanisms of Wave Liquefaction Conversion of Coal to Liquids for Reactor Refinement and Optimization

    SBC: H Quest Vanguard Inc            Topic: 18

    With 27% of the world’s coal reserves located in the United States, development of a clean, efficient, and economically viable pathway to coal utilization is of strategic importance. Development of advanced coal-to-liquids technologies provides this direct pathway, while improving energy security, reducing coal environmental footprint, and promoting economic development directly in the communiti ...

    STTR Phase I 2016 Department of Energy
  10. Spouted Fluid Beds for Chemical Looping Combustion/Gasification

    SBC: ENVERGEX LLC            Topic: 15a

    This SBIR/STTR project targets the development of a validated modeling/design tool for predicting the behavior of spouted fluidizied beds for chemical looping combustion/gasification applications of coal and biomass fuels and fuel blends. Chemical looping is an advanced energy conversion technology for generating a pure CO2 effluent, which can then be sequestered or utilized. A spouted fluidized b ...

    STTR Phase I 2016 Department of Energy
US Flag An Official Website of the United States Government