You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Multimode Organic Scintillators for Neutron/Gamma Detection

    SBC: Radiation Monitoring Devices, Inc.            Topic: DTRA19B003

    There is significant interest in multi-functional materials enabling gamma-ray spectroscopy, neutron/gamma pulse shape discrimination (PSD), ultra-fast response, and time-of-flight (TOF) neutron detection. These materials would be used in a variety of mission scenarios for the localization and monitoring of special nuclear materials. Commercial inorganic scintillators may offer some of these chara ...

    STTR Phase II 2021 Department of DefenseDefense Threat Reduction Agency
  2. A Unified System-of-Systems Design and Analysis Toolset for Aircraft Thermal Management Systems

    SBC: PC Krause And Associates, Inc.            Topic: N19BT025

    Modern and next generation military aircraft face increasing challenges as thermal demands grow while available heat sinks reduce. Legacy platforms upgraded with advanced electrical systems are also encountering similar thermal constraints. Modeling and simulation (M&S) tools provide a cost-effective solution to the design, analysis, and optimization of growing thermal management challenges, but t ...

    STTR Phase II 2021 Department of DefenseNavy
  3. Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: N19BT033

    A significant barrier to the insertion of ceramic matrix composite (CMC) materials into advanced aircraft engines is their inherent degradation under erosion and post erosion. Our team will develop and demonstrate a physics-based model for erosion/post erosion of CMC’s at room and elevated temperatures (RT/ET). The ICME (Integrated Computational Material Engineering) Physics based Multi Scale Mo ...

    STTR Phase II 2021 Department of DefenseNavy
  4. Software developments for large-eddy simulations on GPU-accelerated systems

    SBC: CASCADE TECHNOLOGIES, INC.            Topic: N14AT005

    The objectives of the proposed work are twofold. The first goal is to develop and validate GPU-based static and moving versions of Cascade's large eddy simulation (LES) software CharLES that would fully leverage existing (and future) GPU-accelerated systems accessible by NAVAIR and other DoD agencies. These software developments will be performed by Cascade. For the current project, the targeted c ...

    STTR Phase II 2021 Department of DefenseNavy
  5. Computer Vision Image Interpretation for 3D Model Reconstruction

    SBC: TOYON RESEARCH CORPORATION            Topic: DTRA18B001

    Toyon Research Corporation (Toyon) and the University of California, Santa Barbara (UCSB) propose research, development, and demonstration of algorithms and an efficient software prototype for 3D model reconstruction using single images collected via remote sensing. In particular, the effort is focused on processing of high-resolution commercial satellite images for 3D reconstruction of buildings. ...

    STTR Phase II 2021 Department of DefenseDefense Threat Reduction Agency
  6. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  7. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  8. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  9. Light-Weight Solar Cells with High Specific Power and Conversion Efficiency

    SBC: AGILTRON, INC.            Topic: N14AT003

    Agiltron in collaboration with National Renewable Energy Laboratory (NREL) will develop a new class of high-efficiency and lightweight broadband inverted metamorphic multi-junction (IMM) solar cells for the uninterrupted flight missions of unmanned aerial vehicles (UAVs). The approach is closely coupled with Agiltrons extensive experience in high-transmittance broadband and wide-angle anti-reflect ...

    STTR Phase II 2016 Department of DefenseNavy
  10. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV Systems, LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government