You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)

    SBC: NEXTGEN AERONAUTICS, INC.            Topic: AF14AT01

    Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...

    STTR Phase II 2016 Department of DefenseAir Force
  2. Development of Low Cost Magnetocaloric Nanomaterials for Sub 80oK Refrigeration Applications

    SBC: GENERAL ENGINEERING & RESEARCH, L.L.C.            Topic: 12

    Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

    STTR Phase I 2016 Department of Energy
  3. Organic-Inorganic Hybrid Nanocomposite as Radiation-resistant Electrical Insulator

    SBC: INNOSENSE CORPORATION            Topic: 20

    The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...

    STTR Phase I 2016 Department of Energy
  4. High Gradient Accelerating Structure for Low Energy Protons

    SBC: RADIABEAM SYSTEMS, LLC            Topic: 25

    Currently, the most promising types of radiotherapy is proton or carbon therapy, as they have demonstrated significant improvements in clinical efficiency and reduced toxicity profiles. Unfortunately, the high cost of treatments using both proton and carbon beams is the limiting factor preventing hadron therapy from becoming the standard of care for a wider range of cancers. Designing a linear acc ...

    STTR Phase I 2016 Department of Energy
  5. Low Cost Olefin Production from Shale Gas by Laser Enhanced Pyrolysis through Spatial Beam Decoherence

    SBC: Solid Cell Inc.            Topic: 14a

    The new shale oil and gas boom in the United States has propelled the US to the largest oil and gas producer in the world. A consequence of this prosperity is an oversupply of shale gas on the market. With steady growth in the ethylene market at 4 - 5% per year, new ethylene production capacity near the source of shale gas would create a valuable market for excess shale gas and reduce the flaring ...

    STTR Phase I 2016 Department of Energy
  6. A Comprehensive Web Infrastructure for Standardizing, Storing, and Launching Density Functional Calculations of Materials and Chemical Compounds

    SBC: Citrine Informatics, Inc.            Topic: 09a

    Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

    STTR Phase I 2016 Department of Energy
  7. Membranes and Materials for Energy Efficiency- Subtopic d) Other. Title: Polysulfide-Blocking Polymer Membrane Separators for Rechargeable Lithium-Sulfur Batteries

    SBC: Sepion Technologies            Topic: 12a

    Renewable sources of energy including solar and wind are fast gaining ground on fossil fuels, in part because of their sustainability and environmental benefits. A major issue, however, has been finding efficient ways to store the energy that renewables generate for use when the demand for energy is high. Lithium-­‐sulfur batteries, which store electrical energy by transferring electrons to or ...

    STTR Phase I 2016 Department of Energy
  8. High Spatial Resolution Ultrafast Spectroscopy

    SBC: MESA PHOTONICS LLC            Topic: 10a

    Chemical sensitive imaging of heterogeneous materials and biological cells requires a sensitive, high spatial resolution microscopy method based on vibrational resonances that is capable of performing in situ spectroscopy with both frequency and time resolution. Statement of how this problem or situation is being addressed. In this SBIR/STTR, we will develop a new coherent Raman microscopy techn ...

    STTR Phase II 2016 Department of Energy
  9. Keck‐PAD Fast‐Framing Hybrid X‐ray Pixel Array Detector

    SBC: Sydor Instruments, LLC            Topic: 04a

    The capabilities of modern x-ray light sources have opened up new areas of research in the study of in- situ fast irreversible processes. Irreversible processes or “single shot” experiments are challenging since they require detectors that can obtain a succession of x-ray images within the time frame of the process in question. This requires high sensitivity, wide dynamic range x-ray detection ...

    STTR Phase II 2016 Department of Energy
  10. Nano-Patterned Cathode Surfaces for High Efficiency Photoinjectors

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: 05a

    Metal photoinjector cathode development has shown recent promise with nano-patterning technology. However, in order to be competitive with semi-conductor cathodes, a further enhancement in efficiency is needed. TECHNICAL APPROACH Specific nano-patterning of sub-wavelength features to produce antennae provides coupling of incoming laser light with the surface of the metal cathode. Bowtie nano-anten ...

    STTR Phase II 2016 Department of Energy
US Flag An Official Website of the United States Government