You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Spray-based visual indicator of opioids for the rapid and effective decontamination of large areas

    SBC: Triton Systems, Inc.            Topic: CBD20AT001

    Triton Systems, Inc. will collaborate with The University of Massachusetts Lowell to develop a spray-based technology for the rapid, visual identification of opioids, turning contaminated areas from nondescript white powders to a brightly colored spots for easy recognition with the naked eye. The technology leverages molecular recognition units that bind strongly and specifically to a variety of o ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  2. Eye-readable Solution-based Dye Displacement Probe for Large-area Detection of Opioids

    SBC: Intelligent Optical Systems, Inc.            Topic: CBD20AT001

    Intelligent Optical Systems, Inc., in collaboration with Bowling Green State University, proposes to develop a field-rugged, eye-readable indicating spray solution that can immediately detect synthetic opioids over a large area of contamination (i.e., military vehicles, individual protective equipment, clandestine labs, etc.). The proposed chemosensor in a spray solution format will detect multipl ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  3. Opioid Indicator Spray for Complex Surfaces

    SBC: Clear Scientific, LLC            Topic: CBD20AT001

    Opioids, especially synthetic opioids, are a constant threat to the safety of civilian first responders; there are now serious concerns about their use in modern chemical warfare. Fentanyl and its many analogues (carfentanil, remifentanil, lofentanil, mefentanil, sufentanil, etc.) are extremely hazardous—if ingested or inhaled, many synthetic opioids cause lethal intoxication with only a few gra ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  4. Rugged Ultrafast Radiation Hard Scintillators for Nuclear Battlefield

    SBC: CapeSym, Inc            Topic: DTRA20B001

    Scintillator radiation detectors offer high sensitivity and relatively accurate radionuclide detection at a reasonable price. However, most of the available commercial scintillators have long decay times ranging from hundreds of nanoseconds to tens of microseconds. As a result, they have limited performance in high dose rate environments such as nuclear battlefields, robotic nuclear weapons test s ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  5. Fast and Radiation Hard Scintillators for High Dose Detection

    SBC: Radiation Monitoring Devices, Inc.            Topic: DTRA20B001

    The event of nuclear explosion generates harsh radiation conditions, evaluation of which is critical in order to protect the military and civilian personnel from serious harm. Due to these harsh conditions only very simple methods of radiation assessment are employed, such as measurement of equivalent dose. Improvements to current instrumentation are sought that would provide energy resolved dose ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  6. Integrated Circuits

    SBC: NU TREK INC            Topic: DTRA20B002

    The Nu-Trek team is proposing to develop µDet, a low Size, Weight, and Power (SWaP) read out integrated circuit (IC) for gamma and neuron detectors. µDet offers pulse shape digitization, which in turn enables gamma-neutron discrimination. This is a game changing capability that brings laboratory-level functionality to the field. In Phase I the Nu-Trek Team will develop a baseline design for the ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  7. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: Microelectronics Research Development Corporation            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: Scientific Applications & Research Associates, Inc.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING INC            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government