You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Routing for IP based Satellite Ad-Hoc Networks

    SBC: Seakr Engineering, Inc.            Topic: AF11BT12

    The SEAKR team proposes to continue development of the advanced protocol routing system begun in the Phase I effort, to reduce risk toward a flight deployable system for SATCOM assets such as Iridium NEXT. SEAKRs development of the Iridium NEXT modem...

    STTR Phase II 2016 Department of DefenseAir Force
  2. High Speed Electronic Device Simulator

    SBC: TECH-X CORPORATION            Topic: AF15AT33

    The overall project objective is to develop and demonstrate a software package based on Fermi kinetics charge transport and Delaunay/Voronoi field discretization that accurately predicts semiconductor device behavior from DC up through the mm-wave and TH...

    STTR Phase II 2016 Department of DefenseAir Force
  3. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N16AT018

    Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (people and/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, such systems may also form the equivalent of an underwater cell phone network using sound to carry the information. The aco ...

    STTR Phase I 2016 Department of DefenseNavy
  4. High Gain, High Power PCSS with Integrated Monolithic Optical Trigger

    SBC: Eureka Aerospace            Topic: A14AT004

    This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...

    STTR Phase II 2016 Department of DefenseArmy
  5. Tunable High-Power Infrared Lasers for Standoff Detection Applications

    SBC: EOS Photonics            Topic: A14AT015

    To achieve the goals of this program improving spectral coverage and output power of monolithic QCL sources - we propose to develop in collaboration with MIT Lincoln Laboratory a broadly tunable high power source that is based on Eos proprietary QCL array technology. The current generation of Eos commercially available fully packaged QCLAs (The Matchbox) can be tuned over a wavelength range of u ...

    STTR Phase II 2016 Department of DefenseArmy
  6. Engineered DLC based Wear Resistant Coating For Extended Life Foil-Air Bearings

    SBC: NOKOMIS, INC            Topic: N16AT005

    Foil/air bearings have the benefit of negligible friction and wear once sufficient airflow is obtained; however, during spin up and spin down these bearings are subject to contact with the rotating surfaces upon which they act and thus are subject to frictional losses and wear. Modern air-cycle machines (ACMs) depend on solid lubricant based coating materials such as polyimide coatings to protect ...

    STTR Phase I 2016 Department of DefenseNavy
  7. Perovskite Solar Cells

    SBC: Radiation Monitoring Devices, Inc.            Topic: N16AT006

    The goal of the proposed research is to develop light-weight, flexible, high efficiency solar cells made from perovskite halide light-harvesting materials for use on unmanned aircraft systems (UAS), for use in conjunction with an energy storage system. Solar cells have historically been heavy, costly, and inflexible. In this research, low-cost manufacturing methods will be used to make high effici ...

    STTR Phase I 2016 Department of DefenseNavy
  8. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  9. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Decision Making under Uncertainty

    SBC: GCAS, Inc.            Topic: MDA13T001

    Our proposed second order uncertainty (SOU) product is a decision making software solution that addresses the problem of providing accurate and precisely defined decision courses of action (COAs) of complex, time-constrained problems in a fraction of the time required by alternative methods striving to achieve the same level of precision. Complex decision situations can deal with large volume of ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government