You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Technology for Sterile Water Generator

    SBC: TDA Research, Inc.            Topic: DHP16007

    Currently, deployed medics must transport, maintain and be resupplied with liquid-based medications and materials that are heavy, expensive to transport, perishable and may require refrigeration. Many medications and materials are or will be available in

    SBIR Phase II 2020 Department of DefenseDefense Health Agency
  2. Plasma Guns for Magnetized Fuel Targets for PJMIF

    SBC: HyperJet Fusion Corporation            Topic: G

    This project develops a potentially faster and cheaper approach to fusion energy that would result in reduced energy emissions. In plasma jet driven magneto-inertial fusion (PJMIF), an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and fr ...

    SBIR Phase I 2020 Department of EnergyARPA-E
  3. Plasma Guns for Magnetized Fuel Targets for PJMIF

    SBC: HyperJet Fusion Corporation            Topic: G

    This project develops a potentially faster and cheaper approach to fusion energy that would result in reduced energy emissions. In plasma jet driven magneto-inertial fusion (PJMIF), an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and fr ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  4. Highly Efficient Vacuum Smelting of Aluminum

    SBC: UHV TECHNOLOGIES, INC.            Topic: G

    The goal of this SBIR project is to develop and demonstrate an innovative aluminum smelting technology that will significantly increase the range of aluminum alloys that can be manufactured from recycling of scrap aluminum. This will result in reduction of need for primary aluminum with corresponding 95% energy and CO2 emission benefits. The proposed melting of pre-sorted aluminum alloys using UHV ...

    SBIR Phase I 2020 Department of EnergyARPA-E
  5. Highly Efficient Vacuum Smelting of Aluminum

    SBC: UHV TECHNOLOGIES, INC.            Topic: G

    The goal of this SBIR project is to develop and demonstrate an innovative aluminum smelting technology that will significantly increase the range of aluminum alloys that can be manufactured from recycling of scrap aluminum. This will result in reduction of need for primary aluminum with corresponding 95% energy and CO2 emission benefits. The proposed melting of pre-sorted aluminum alloys using UHV ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  6. Functional Engineering of a Photosynthetic Desalination Pump Circuit

    SBC: Phytodetectors, Inc.            Topic: G

    Phytodetectors will design and engineer a synthetic biological pump circuit to increase the volume of water produced via photosynthetic desalination. This project builds off previous technology designed by Phytodetectors: a mangrove-inspired ultra-filter that allows plants to purify salt water as well as secrete water with properties comparable to bottled water. The partnership seeks to demonstrat ...

    STTR Phase I 2020 Department of EnergyARPA-E
  7. Extremely Fast and Efficient Direct Contact Ultrasonic Drying for Roll to Roll Manufacturing

    SBC: ULTRASONIC TECHNOLOGY SOLUTIONS LLC            Topic: G

    This project has a very focused goal of developing direct contact ultrasonic dryer modules that can be retrofitted in a roll to roll manufacturing drying process. The proposed technology can create new paradigms shift in industrial drying technology which directly addresses one of the key ARPA-E mission areas in “advancing non-evaporative dehydration and drying technologies.” Invented in 2015 ...

    SBIR Phase I 2020 Department of EnergyARPA-E
  8. Extremely Fast and Efficient Direct Contact Ultrasonic Drying for Roll to Roll Manufacturing

    SBC: ULTRASONIC TECHNOLOGY SOLUTIONS LLC            Topic: G

    This project has a very focused goal of developing direct contact ultrasonic dryer modules that can be retrofitted in a roll to roll manufacturing drying process. The proposed technology can create new paradigms shift in industrial drying technology which directly addresses one of the key ARPA-E mission areas in “advancing non-evaporative dehydration and drying technologies.” Invented in 2015 ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  9. Development of a Non Toxic Paint Stripper

    SBC: TDA Research, Inc.            Topic: 19NCERP2

    There is a tremendous need for an all-purpose paint stripper that is safe to handle and that does not harm the environment. The most popular all-purpose paint strippers are based on methylene chloride (MeCl), which is dangerous to workers and harmful to the environment. In particular, it is highly volatile, and if it is used in an area with poor ventilation it is an immediate health hazard. In ext ...

    SBIR Phase II 2020 Environmental Protection Agency
  10. Low cost hyperspectral measurement system to identify harmful materials in construction and demolition (C&D) materials

    SBC: SYMBIOS TECHNOLOGIES INC.            Topic: 19NCERP2

    Because C&D materials constitute a significant waste stream, increasing the diversion of C&D materials, through recycling and reuse, is identified as an area of need in EPA’s Sustainable Materials Management (SMM) Program Strategic Plan. Due to a lack of technologies to quickly identify harmful constituents, C&D-materials recyclers often dispose of potentially usable materials as a matter of pre ...

    SBIR Phase II 2020 Environmental Protection Agency
US Flag An Official Website of the United States Government