You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Technology for Sterile Water Generator
SBC: TDA RESEARCH, INC. Topic: DHP16007Currently, deployed medics must transport, maintain and be resupplied with liquid-based medications and materials that are heavy, expensive to transport, perishable and may require refrigeration. Many medications and materials are or will be available in
SBIR Phase II 2020 Department of DefenseDefense Health Agency -
Plasma Guns for Magnetized Fuel Targets for PJMIF
SBC: HyperJet Fusion Corporation Topic: GThis project develops a potentially faster and cheaper approach to fusion energy that would result in reduced energy emissions. In plasma jet driven magneto-inertial fusion (PJMIF), an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and fr ...
SBIR Phase I 2020 Department of EnergyARPA-E -
Plasma Guns for Magnetized Fuel Targets for PJMIF
SBC: HyperJet Fusion Corporation Topic: GThis project develops a potentially faster and cheaper approach to fusion energy that would result in reduced energy emissions. In plasma jet driven magneto-inertial fusion (PJMIF), an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and fr ...
SBIR Phase II 2020 Department of EnergyARPA-E -
Highly Efficient Vacuum Smelting of Aluminum
SBC: UHV TECHNOLOGIES, INC. Topic: GThe goal of this SBIR project is to develop and demonstrate an innovative aluminum smelting technology that will significantly increase the range of aluminum alloys that can be manufactured from recycling of scrap aluminum. This will result in reduction of need for primary aluminum with corresponding 95% energy and CO2 emission benefits. The proposed melting of pre-sorted aluminum alloys using UHV ...
SBIR Phase I 2020 Department of EnergyARPA-E -
Highly Efficient Vacuum Smelting of Aluminum
SBC: UHV TECHNOLOGIES, INC. Topic: GThe goal of this SBIR project is to develop and demonstrate an innovative aluminum smelting technology that will significantly increase the range of aluminum alloys that can be manufactured from recycling of scrap aluminum. This will result in reduction of need for primary aluminum with corresponding 95% energy and CO2 emission benefits. The proposed melting of pre-sorted aluminum alloys using UHV ...
SBIR Phase II 2020 Department of EnergyARPA-E -
Functional Engineering of a Photosynthetic Desalination Pump Circuit
SBC: Phytodetectors, Inc. Topic: GPhytodetectors will design and engineer a synthetic biological pump circuit to increase the volume of water produced via photosynthetic desalination. This project builds off previous technology designed by Phytodetectors: a mangrove-inspired ultra-filter that allows plants to purify salt water as well as secrete water with properties comparable to bottled water. The partnership seeks to demonstrat ...
STTR Phase I 2020 Department of EnergyARPA-E -
Extremely Fast and Efficient Direct Contact Ultrasonic Drying for Roll to Roll Manufacturing
SBC: Ultrasonic Technology Solutions, LLC Topic: GThis project has a very focused goal of developing direct contact ultrasonic dryer modules that can be retrofitted in a roll to roll manufacturing drying process. The proposed technology can create new paradigms shift in industrial drying technology which directly addresses one of the key ARPA-E mission areas in “advancing non-evaporative dehydration and drying technologies.” Invented in 2015 ...
SBIR Phase I 2020 Department of EnergyARPA-E -
Extremely Fast and Efficient Direct Contact Ultrasonic Drying for Roll to Roll Manufacturing
SBC: Ultrasonic Technology Solutions, LLC Topic: GThis project has a very focused goal of developing direct contact ultrasonic dryer modules that can be retrofitted in a roll to roll manufacturing drying process. The proposed technology can create new paradigms shift in industrial drying technology which directly addresses one of the key ARPA-E mission areas in “advancing non-evaporative dehydration and drying technologies.” Invented in 2015 ...
SBIR Phase II 2020 Department of EnergyARPA-E -
Development of a Non Toxic Paint Stripper
SBC: TDA RESEARCH, INC. Topic: 19NCERP2There is a tremendous need for an all-purpose paint stripper that is safe to handle and that does not harm the environment. The most popular all-purpose paint strippers are based on methylene chloride (MeCl), which is dangerous to workers and harmful to the environment. In particular, it is highly volatile, and if it is used in an area with poor ventilation it is an immediate health hazard. In ext ...
SBIR Phase II 2020 Environmental Protection Agency -
Low cost hyperspectral measurement system to identify harmful materials in construction and demolition (C&D) materials
SBC: SYMBIOS TECHNOLOGIES INC. Topic: 19NCERP2Because C&D materials constitute a significant waste stream, increasing the diversion of C&D materials, through recycling and reuse, is identified as an area of need in EPA’s Sustainable Materials Management (SMM) Program Strategic Plan. Due to a lack of technologies to quickly identify harmful constituents, C&D-materials recyclers often dispose of potentially usable materials as a matter of pre ...
SBIR Phase II 2020 Environmental Protection Agency