You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Development of Next-Generation Composite Flywheel Design for Shock and Vibration Tolerant, High Density Rotating Energy Storage

    SBC: Mohawk Innovative Technology, Inc.            Topic: N13AT022

    Under this Phase II effort, the design of a modular 60 kw (3.6 MJ) shock tolerant composite flywheel for backup/ride through power will be finalized. This composite flywheel design will make use of a novel low cost thermal press cure process to fabricate the individual composite rings used to build up the flywheel. The manufacturing process parameters used in previous hydroburst testing of initial ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Laser and Rapid-thermal Crystallization of Low-defect GeSn and SiGeSn Layers for High Performance Infrared Detectors and Integrated Si-based Optoelectronic Devices

    SBC: EPITAXIAL LABORATORY INC            Topic: AF16AT28

    latereThis proposal describes the development of a process to synthesize low defect Ge1-xSnx and SiyGe1-x-ySnx layers on silicon and silicon-on-insulator (SOI) substrates through low thermal budget laser and rapid thermal annealing/crystallization for high performance mid-wave infrared (MWIR) photo detectors and integrated Si-based optoelectronic devices. In phase I, we demonstrated synthesis of G ...

    STTR Phase II 2018 Department of DefenseAir Force
  3. Energy Efficient, Non-Silicon Digital Signal Processing (DSP)

    SBC: HYPRES, INC.            Topic: N17AT027

    Superconductor digital circuits, operating at very high clock speed, can directly process wideband digitized radio frequency (RF) signals. By integrating such digital processing circuitry together with superconductor analog-to-digital converters (ADCs), we propose to develop the next generation digital-RF receivers. Leveraging the recent development of multiple superconductor ADCs on the same chip ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  5. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies “Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft” Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a “bolt on” assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsio ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: OCEANIT LABORATORIES INC            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase II 2018 Department of DefenseNavy
  7. Integrated Computational Material Engineering Approach to Additive Manufacturing for Stainless Steel (316L)

    SBC: SENVOL LLC            Topic: N16AT022

    The objective in this project is to implement and validate a probabilistic qualification framework that will enable additive manufacturing (AM) materials and part qualification through the use of a data-driven predictive model within a statistical framework. Senvol seeks to develop and validate a data-driven ICME probabilistic framework for assisting qualification of AM materials and parts. Phase ...

    STTR Phase II 2018 Department of DefenseNavy
  8. 3D-Printed Lightweight Optics for Directed Energy Systems

    SBC: Optimax Systems, Inc.            Topic: MDA13T009

    It is proposed that using additive manufacturing to fabricate a lightweight optic would result in a weight reduction of the optical system, since 3D-printing provides superior flexibility in the geometric design of the lightweight optic. In addition, the conventional approach to lightweight an optic requires machining of mechanically-hard optical substrates such as SiC, which is time-intensive an ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  9. Tools for Parallel Adaptive Simulation of Multiphase Ballistic Flows

    SBC: SIMMETRIX INC.            Topic: A15AT002

    Ballistic systems operate in flow regimes characterized by high speeds, temperatures and pressures, with reacting multiphase, multi-species fluids and fluid-structure interactions. Substantial progress has been made on methods to simulate the component physics. However, there are technical gaps remaining related to tracking the interacting physical components throughout a simulation. This project ...

    STTR Phase II 2016 Department of DefenseArmy
  10. DREAMIT- Design, Reconfigure and Evaluate Autonomous Models in Training

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF15AT14

    Our Phase I work focused on improving modeling and simulations so that the impact of autonomous systems in the battlespace could be better understood. As we have trained our attention on Phase II, it has become increasingly clear that the work we are doing to improve the modeling and simulation of autonomous systems also provides significant leverage for the development of the intelligent behavior ...

    STTR Phase II 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government