You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Quantifying Uncertainty in the Mechanical Performance of Additively Manufactured Parts Due to Material and Process Variation

    SBC: VEXTEC CORPORATION            Topic: N16AT004

    The Phase I objective is a proof of concept capability integrating process information, material properties and damage tolerance simulations into the Additive Manufacturing (AM) design certification process. VEXTEC has a toolbox of software and methods that consists of various software modules in multiple formats that are used to assess the durability of parts processed by traditional methods of c ...

    STTR Phase I 2016 Department of DefenseNavy
  2. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: Oceanit Laboratories, Inc.            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  3. Embedded Space Analytics

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: N16AT020

    Navy needs a real-time graph embedding tool for analyzing huge graphs (millions of nodes and billions of edges) from diverse sources. However, current approaches cannot provide dynamic and scalable graph analytics to show the military value of tactical data. In this project, InfoBeyond advocates EStreaming (Embedding & Streaming) for scalable and efficient graph streaming. EStreaming promotes big ...

    STTR Phase I 2016 Department of DefenseNavy
  4. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for the creation of a common streaming model for 3D data that is agnostic to the display technology. To address this need, Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) propose to form a c...

    STTR Phase I 2016 Department of DefenseAir Force
  6. CyberSTEPS- Cyber Skills Training with Electronic Performance Support

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF16AT08

    There are many challenges in creating Air Force systems that are resilient against cyber threats. The cyber environment and its threats are highly dynamic, requiring practices and training to be dynamic as well. Cyber threats must be considered during th...

    STTR Phase I 2016 Department of DefenseAir Force
  7. DREAMIT- Design, Reconfigure and Evaluate Autonomous Models in Training

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF15AT14

    Our Phase I work focused on improving modeling and simulations so that the impact of autonomous systems in the battlespace could be better understood. As we have trained our attention on Phase II, it has become increasingly clear that the work we are doing to improve the modeling and simulation of autonomous systems also provides significant leverage for the development of the intelligent behavior ...

    STTR Phase II 2016 Department of DefenseAir Force
  8. Reverberation Mitigation of Speech

    SBC: Minerva Systems & Technologies, LLC            Topic: AF15AT17

    Automatic speech recognition (ASR) technology is in wide use today and has been successfully integrated into a number of applications. Although there are also many potential applications for automatic speaker identification (SID), SID accuracy rates are generally not sufficient for widespread use in practical applications. For high accuracy ASR and SID, the microphone must be located near the talk ...

    STTR Phase II 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government