Award Data

Launch safety and efficiency requires timely and accurate wind, thermodynamic and pressure information from the surface to 20 km height, and lightning risk identification. A Doppler radar now provides wind measurements that satisfy this requirement at the Eastern Test Range. Thermodynamic soundings are provided by intermittent radiosondes on launch day. Typical intervals of an hour or more between ...

Distributed Spacecraft Missions (DSMs) such as constellations, formation-flying missions, and fractionated missions provide unique scientific and programmatic benefits. Distributed mission architectures allow for multipoint in-situ measurements, multi-angle viewpoints, and considerably improved understanding of the connections between separately measured phenomena and their time variations. DSMs a ...

GTL has developed an innovative composite repair methodology known as the Composite Repair System (CRS). In this phase I effort, CRS is being developed for the repair of damaged induced in thin-laminate composite cryotanks. In applying CRS to damaged composite structures, the required level of structural capacity is recovered to within a predetermined percentage of its original performance after ...

The tiltwing class of aircraft consists of vehicles with the ability to rotate the wing and propulsion system as a unit a full 90 degrees from the standard fixed wing configuration to one in which the wing and thrust axis become perpendicular to the body axis. This thrust vectoring capability allows the aircraft to utilize thrust borne flight for vertical takeoff and landing as well as the convent ...

TSRCo and CU are developing a framework to quantify and predict crew performance in various spacecraft designs in the context of the design process. The framework utilizes an elemental resource breakdown approach to relate the crew, the spacecraft design, and operations. The elements identified in the breakdown correspond to existing measures currently used in the physiological, cognitive, and ps ...

In the Phase I effort, Gloyer-Taylor Laboratories LLC (GTL) verified the feasibility of generating power from space particle radiation. This effort successfully demonstrated electrical power production from a particle radiation source using an initial proof-of-concept device. The effort also identified a second approach that has the potential for even better power generation and offers enhanced ...

At the completion of the research and development effort a Li-foil multi-wire proportional counter (MWPC) neutron detector with more than 625-cm2 of active area will be included in a portable radiation detection system. The system is expected to outperform the standards set by the ANSI N42.53 standards, and gamma-ray rejection ratio (GRR) of 1.0x10-8 or better. A gamma-ray spectrometer for isotope ...

Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

Reducing the allowable concentration of carbon dioxide (CO2) in spacecraft is a critical need for NASA. The system now used on the International Space Station (ISS) is the carbon dioxide removal assembly (CDRA). While it has performed well on the ISS, managers have concluded that using the device to reach the new ppCO2 limit of 2.0 mm Hg is not practical and a new method is needed.In this projec ...

Opterus Research and Development, Inc. proposes to develop and validate multi-scale thin-ply High Strain Composites (HSCs) constitutive modeling tools for incorporation into commercial finite element analysis codes. The constitutive models will capture the time-temperature-load-deformation viscoelastic characteristics common to HSCs as well as the yielding or permanent deformation associated with ...