You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Low-Cost Biological Solution for Reducing Carbon Pollution in Chemical Manufacturing

    SBC: INDUSTRIAL MICROBES INC            Topic: 14NCER1A

    Industrial Microbes is developing a green fermentation platform to replace carbon-emitting petrochemical production with newer methods that build chemicals out of methane and carbon dioxide.Chemical production is a major source of carbon pollution, responsible for 18% of direct industrialemissions. Our innovation is an engineered microbe that can consume carbon dioxide and methane and produce a ch ...

    SBIR Phase II 2016 Environmental Protection Agency
  2. Biofueled Thermoelectric Cookstove

    SBC: HI-Z TECHNOLOGY, INC.            Topic: 15NCER02

    Over 50 million Indian households cook on a bio-mass fire and have unreliable or no electricity but are anxious to purchase an affordable power stove which will provide on-demand power and lighting to their homes. Annually, projected sales of the power stove could save sixteen million trees, reduce cooking fire particulates by 90%, reduce the two million premature deaths caused from indoor air pol ...

    SBIR Phase I 2016 Environmental Protection Agency
  3. High-Efficiency Nutrient Removal and Recovery for Achieving Low Regulatory Limits

    SBC: MICROVI BIOTECH, INC.            Topic: 15NCER05

    Discharge of nutrients (e.g. phosphorus and ammonia) to surface waters can cause eutrophication and the formation of toxic algal blooms, threatening human health and the environment. However, current phosphorus treatment technologies such as chemical precipitation and conventional biological systems can be costly and ineffective to reliably achieve impending effluent regulatory limits of

    SBIR Phase I 2016 Environmental Protection Agency
  4. Encapsulation of Biological Contaminants in Transportation Systems

    SBC: TIAX LLC            Topic: 15NCER07

    TIAX has developed a technology that meets the EPA' s need for decontamination of biological material in railway and subway cars. It provides simultaneous encapsulation and killing of biological contaminants with the added capability for decontamination of chemical and radiological hazards. Current technologies are manpower intensive involving separate steps for site preparation; decontamination; ...

    SBIR Phase I 2016 Environmental Protection Agency
  5. Secure Hypervisor for Mobile Device

    SBC: Physical Optics Corporation            Topic: AF151039

    To address the Air Force need for Android mobile device (MD) virtualization and a Mediated Mobile Access (MMA) solution, Physical Optics Corporation (POC) proposes to advance development of a new Secure Hypervisor for Mobile Devices (HyperM), which was pr

    SBIR Phase II 2016 Department of DefenseAir Force
  6. Sensor Tipping and Cueing using Artificial Intelligence Techniques

    SBC: Stottler Henke Associates, Inc.            Topic: AF151081

    The ultimate goal of this proposed effort is to improve OPIR (and other initiating event) follow-on ISR tipping and cueing and satellite bus telemetry data analysis; dramatically shorten the associated response time to new OPIR (and other) events; and improve ISR collection quality, resulting in: improved analyst performance; better-quality schedules; and higher, and better utilization of sensors. ...

    SBIR Phase II 2016 Department of DefenseAir Force
  7. Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) of On-Demand Environmentally Stable Structural Composite Parts

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA152001

    San Diego Composites, Inc. (SDC) is developing the Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) pod to produce on-demand, corrosion resistant, aluminum and stainless steel equivalent parts in less than three days. RAMCAM combines the advantageous 2 day lead time of custom parts produced by 3D printing with the 1 day forging of structural parts via composite compression ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  8. High Performance, High Yield RF Photonic Integration Platform

    SBC: Freedom Photonics LLC            Topic: AF151005

    ABSTRACT: In this work, freedom Photonics is proposing to develop a hybrid integration platform that integrate yielded, best-of-breed optical components on a low-loss Silicon platform to form high performance, phase stable integrated RF photonic systems. This will be done in a highly manufacturable manner, using passively aligned placement of the semiconductor components on the Silicon substrate t ...

    SBIR Phase I 2016 Department of DefenseAir Force
  9. Materials and Designs for Compact High-Voltage Vacuum Insulator Interfaces

    SBC: DIVERSIFIED TECHNOLOGIES, INC.            Topic: AF151013

    Diversified Technologies, Inc. proposes to develop a compact short-pulse high voltage insulator through management of the electric field gradients over the insulation distance and selection of materials that are resistant to surface breakdown initiation. Electric field gradient management is accomplished by placing conductors at regular intervals along the insulation path of the insulator. DTI pro ...

    SBIR Phase II 2016 Department of DefenseAir Force
  10. Rigid-body Off-axis Ordnance Shock/Tail-slap Environment Replicator (ROOSTER)

    SBC: Karagozian & Case, Inc.            Topic: AF151104

    Karagozian and Case, Inc. (K&C) proposes to develop a Rigid-Body Off-Axis Ordnance Shock And Tail-Slap Environment Replicator (ROOSTER) prototype which can induce peak accelerations over 10,000 g for sustained periods of at least 5 ms to sub-scale non-inventory warheads in order to replicate the harsh and complex deceleration environment experienced by ordnance during penetration. The concept take ...

    SBIR Phase II 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government