Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Low Cost In-Situ Bimetallic Reduction Prototype System for the Treatment and Remediation of Chlorinated Solvent-Contaminated Waters

    SBC: ATS-MER, LLC            Topic: N/A

    N/A

    SBIR Phase I 1998 Environmental Protection Agency
  2. Hazardous Metal-Free Color Pigments

    SBC: Nanomaterials Research LLC            Topic: N/A

    Inorganic color pigments based on hazardous metals such as chromium, mercury, cobalt, lead, etc., account for more than 95% of the U.S. and worldwide pigments consumption. Color pigments are commonly used by numerous industries and in various consumer products. It is estimated that they are one of the largest vehicles of heavy metal-based chemicals in commerce. A technology that can provide a co ...

    SBIR Phase II 1998 Environmental Protection Agency
  3. Fabrication of ZrC, HfC, TaC-based Fibrous Monolithic Ceramics for Rocket Propulsion Systems

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to develop a low cost, flexible manufacturing method for the production of high temperature ceramic composites for rocket propulsion systems. The matrix materials selected for this program will be ZrC, HfC, and TaC. These-materials have good oxidation/corrosion and ablation resistance at elevated temperatures, but typically do not possess the thermal shock resistance an ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  4. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  5. A Novel Sputtering Technique for Deposition of Robust Buffer Layers Suitable for HTS Technology

    SBC: APPLIED THIN FILMS, INC.            Topic: N/A

    The objective of this proposed effort is to identify and develop new and robust buffer layer materials for the recently developed metal-coated YBCO superconducting tape technology. While the current choice of yttria stabilized zirconia (YSZ) and cerium oxide as buffer layers has been appropriate for demonstration of coated tapes with current densities over 106 A/cm2, they may not serve all the req ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  6. Dynamic Firing Zone Imaging System

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    An automated dynamic firing zone generation imaging system is needed to increase the effectiveness and utility of shipboard weapon systems. The current manual firing zone definition process is manpower intensive, complex, and cannot account for motion or changing topside configuration. These limitations greatly restrict the lethality and utility of shipboard weapons. This project proposes a dyna ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. Unified HP/RT Development to Deployment Middleware Platform

    SBC: Conceptual Systems & Software Inc            Topic: N/A

    A significant problem for modern combat control system implementations is the incompatible development and deployment environments. These applications have specific performance requirements that until recently were only accurately obtained on the target installation system. However, for various logistic and economic reasons, the platforms utilized for advanced applications have typically been inc ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Novel Fiber Lasers and Amplifiers

    SBC: Containerless Research, Inc.            Topic: N/A

    CR1 has pioneered a process that allows, for the first time, the synthesis of a new generation of optical fibers made of oxide glasses of compositions other than silica, such as Y203-A1203. Stanford University has expertise and instrumentation to characterize fiber laser materials and evaluate device performance. The proposed research combines these capabilities to demonstrate feasibility of new ...

    STTR Phase I 1998 Department of DefenseAir Force
  9. Xpatch Traceback Modification for Improved Signature Estimation and Model Validation

    SBC: DEMACO, INC.            Topic: N/A

    The use of synthetic data for the generation of target signature templates is a vital element of current and future automatic target recognition systems. [1] [2] Although current synthetic signatures closely match their measured counterparts, they suffer from two shortcomings: 1) susceptibility to model error and 2) poor representation of signature variance. The current model validation relie ...

    SBIR Phase II 1998 Department of DefenseAir Force
  10. Multi-Level Modeling and Simulation for Signal Integrity

    SBC: DEMACO, INC.            Topic: N/A

    With the increasing demand for higher component density and higher source frequencies in electronic circuits, the requirements for signal integrity and electro-magnetic compatibility have become paramount. Although some solutions exist for simpler packaging and signal integrity problems, the more challenging issues are the design, computational analysis and testing of piece-parts and systems. Re ...

    SBIR Phase I 1998 Department of DefenseAir Force
US Flag An Official Website of the United States Government