Award Data

THE SOLUBILITY OF AIRBORNE RADIONUCLIDES IS AN IMPORTANT PARAMETER IN THE ASSESSMENT OF INHALATION HAZARDS IN THE WORKPLACE AND IN THE INTERPRETATION OF ROUTINE BIOASSAY DATA. SOLUBILITY IS A MAJOR FACTOR IN DETERMINING THE METABOLISM OF THE INHALED ISOTOPES AND DISSOLUTION RATES OF ALPHA-EMITTING COMPOUNDS WHICH ARE PARTICULARLY IMPORTANT DUE TO THEIR HIGH RADIOTOXICITY. CURRENT SOLUBILITY TESTIN ...

This SBIR project addresses the problem of waste and low manufacturing yield in the typical thin film manufacturing process. It has the potential to make a significant impact on energy utilization and become a critical component to making thin film processes cost effective, leading to waste-free manufacturing. Thin film deposition processes are extensively used in man-critical industries with sign ...

Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products could i ...

Conventional cement based construction materials such as stucco and concrete are prone to cracking with poor thermal insulation, and are very permeable to water. Repair of deteriorated cement based structures is a major problem, and in United States alone repair cost is estimated to be over $100 billion range. Commercial stuccos are susceptible to cracking under the influenced of repeated fluctu ...

During this Phase I research project, MER Corporation will investigate the effects of recycled polymers on cement-based materials, particularly the effects on mechanical properties, thermal conductivity, and stability to water and air. Conventional construction materials based on cement usually are poor thermal insulators and very permeable to water. The latter properties have been imp ...

This SBIR project addresses the problem of waste and low manufacturing yield in the typical thin film manufacturing process. It has the potential to make a significant impact on energy utilization and become a critical component to making thin film processes cost effective, leading to waste-free manufacturing. Thin film deposition processes are extensively used in man-critical industries wit ...

Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products co ...

N/A

AT MULTI-UNIT NUCLEAR GENRATING STATIONS, CONTROL ROOM OPERATORS ARE GENERALLY LICENSED TO OPERATE ALL SIMILAR UNITS. SIMULATOR TRAINING CONDUCTED AT THE LICENSEE TRAINING FACILITY OCCURS ON ONE SIMULATOR WHICH MAY NOT EXACTLY MIMIC ANY UNIT. INADEQUATE TRAINING ON UNIT-TO-UNIT AND UNIT-TO-SIMULATOR DIFFERENCES, IN CONJUNCTION WITH LIMITED PER-PERSON SIMULATOR TRAINING HOURS, CAN RESULT IN INCREAS ...

WHEN ROTATING MACHINERY DETERIORATES, VIBRTION PATTERSN CHANGE. WHEN BEARING FREQUENCIES APPEAR, THEN INCREASE IN AMPLITUDE, BEARING FAILURE LOOMS. THE SAME WITH VALVES; WHEN THEY LEAK, THEY VIBRATE. AS LEAKAGE INCREASES, THE VIBRATION PATTERN CHANGES. THERE ARE MANY OTHERS. THE KEY IS KNOWING WHERE AND HOW DEEPLY TO LOOK. THE KEY IN OLDER REACTOR PLANTS IS TO UNOBTRUSIVELY, ECONOMICALLY BACKFIT S ...