List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Ultra-flexible high efficiency photovoltaics- c-Si

    SBC: PowerFilm, Inc.            Topic: A18067

    The modern Military has an ever increasing need for power, in particular light weight portable power with high power densities and decreased deployed foot print.Currently packable panels are made from low efficiency light weight Amorphous Silicon or carbon fiber backed crystalline silicon.The weakness of the amorphous silicon technology resides in the power conversion efficiency (watts per unit ar ...

    SBIR Phase I 2018 Department of DefenseArmy
  2. Reliability-Based Design Optimization Software Package for Broader Simulation-Based Design Applications

    SBC: RAMDO Solutions, LLC            Topic: A14075

    The Reliability Analysis and Multidisciplinary Design Optimization (RAMDO) software developed during the current SBIR Phase II (A14-075) provides very accurate results given: (1) accurate input distribution models obtained from large numbers of input test data; and (2) accurate simulation models.However, in industrial and defense applications, often only limited numbers of input test data are avai ...

    SBIR Phase II 2017 Department of DefenseArmy
  3. Reliability-Based Design Optimization Software Package for Broader Simulation-Based Design Applications

    SBC: RAMDO Solutions, LLC            Topic: A14075

    It is critical to the US Army to have reliable ground vehicles that can be relied on to demonstrate consistently high levels of performance for survivability, mobility, and durability under a wide range of operational conditions without being subject to unanticipated premature failure, and with substantially reduced maintenance requirements. In response to critical Army needs and dual use in comme ...

    SBIR Phase II 2015 Department of DefenseArmy
  4. Reliability-Based Design Optimization Software Package for Broader Simulation-Based Design Applications

    SBC: RAMDO Solutions, LLC            Topic: A14075

    It is critical to the US Army to have reliable ground vehicles that can be relied on to demonstrate consistently high levels of performance for survivability, mobility, and durability under a wide range of operational conditions without being subject to unanticipated premature failure, and with substantially reduced maintenance requirements. In response to critical Army needs and dual use in comm ...

    SBIR Phase I 2014 Department of DefenseArmy
  5. Array Processing Techniques for III-V Material, Strained Layer Superlattice, Mid and Long Wavelength, High Sensitivity Infrared (IR) Sensors

    SBC: ASL Analytical, Inc.            Topic: A09080

    This proposal describes an approach to realize InAs/GaSb type II superlattice focal plane arrays through planar processing. A problem with conventional mesa diode processing approaches is that nonradiative surface recombination at the exposed pn junction is extremely rapid, leading to surface leakage currents that limit the mesa diode performance. By eliminating etched sidewalls through planar p ...

    SBIR Phase I 2010 Department of DefenseArmy
  6. Rapid Computational Fluid Dynamics (CFD) Methodology for Rotorcraft Maneuver Analysis

    SBC: Sukra Helitek Inc.            Topic: A06009

    The lack of proper estimation of air loads encountered during transient maneuvers introduces excessive design conservatism. A reduced fidelity CFD methodology based on momentum source (Rot3DC) and a comprehensive analysis code (RCAS) were coupled in Phase I to validate the ``proof-of-concept'' that such system is capable of rapidly analyzing steady and transient maneuvers. The tightly coupled sys ...

    SBIR Phase II 2008 Department of DefenseArmy
  7. Rapid Computational Fluid Dynamics (CFD) Methodology for Rotorcraft Maneuver Analysis

    SBC: Sukra Helitek Inc.            Topic: A06009

    The lack of proper estimation of air loads encountered during transient maneuvers introduces excessive design conservatism. This proposal offers to develop a computational tool, based on the lower order momentum source rotor model, capable of analyzing steady and transient maneuvers. This tool will be implicitly coupled with a government supplied comprehensive analysis code to resolve the kinema ...

    SBIR Phase I 2006 Department of DefenseArmy
  8. Automated Generation of Viscous CFD Grids for Increased Productivity of High Fidelity Aerodynamic Analysis

    SBC: Sukra Helitek Inc.            Topic: A02159

    Viscous analysis is vital for a complete understanding of missile and UAV aerodynamic properties. A high fidelity aerodynamic analysis tool capable of predicting a flow field can significantly reduce design time and cost. The success of a CFD analysis is dependent on the quality of the grid. This proposal offers a technique for automatically generating grids suitable for viscous analysis on comple ...

    SBIR Phase II 2004 Department of DefenseArmy
  9. A Preliminary Design Tool for Shrouded-Fans

    SBC: Sukra Helitek Inc.            Topic: N/A

    Shrouded-fans play a key role in the U.S. Army's transportation systems. A preliminary design tool capable of simulating the flow field in different flight conditions for predicting the shroud and fan performance can significantly reduce design costs. Thisproposal offers a computational tool that will lay the foundation for true transient wake calculations of a shrouded-fan in axial and non-axial ...

    SBIR Phase II 2003 Department of DefenseArmy
  10. Automated Generation of Viscous CFD Grids for Increased Productivity of High Fidelity Aerodynamic Analysis

    SBC: Sukra Helitek Inc.            Topic: N/A

    Viscous analysis is vital for a complete understanding of missle and UAV aerodynamic properties. This proposal offers a technique for generating grids suitable for viscous analysis on complex configurations.The principle idea is to divide the region closest to the body into a sequance of inter-connected zones and generate body-conforming grids in these zones.The body-conforming grids are restricte ...

    SBIR Phase I 2003 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government