Award Data

The purpose of this Phase-I is to demonstrate the feasibility of using Alameda Applied Sciences Corporation's Coaxial Energetic Deposition (CED) process to increase the life of gun barrels, specifically the Mk-46 and Mk-48 light-weight machine guns, by depositing a protective refractory metal coating to the inside of the barrel as a replacement for the chrome coatings that are presently used. The ...

The release of mercury into the environment via combustion processes has become an issue of concern for the US and the entire world. Major sources either are regulated or are under review to develop regulations to reduce emissions. ADA Technologies has successfully demonstrated the performance of a novel reactive scrubbing technology for the removal of vapor-phase mercury from incinerator exhaus ...

This Small Business Innovation Research Phase II project addresses the need for improved monitoring technologies for continuous particulate mass and chemical speciation of ambient aerosols. Aerodyne Research, Inc. will develop a prototype Aerosol Chemical Speciation Monitor (ACMS) that measures ambient aerosol mass and chemical composition of non-refractory submicron aerosol particles in real-tim ...

A compact and affordable, microchip-based system for the automated, in situ analysis of inorganic ions in atmospheric aerosols will be develop and verified against traditional, filter-based methods. Our approach combines tow new technologies: (1) a growth tube impactor for particle collection and (2) lab-on-a-chip (LOC) analysis of sulfates and nitrates. The growth tube impactor enlarges indivi ...

Concern for the potential health effects of inhaled particulates led to a federal standard governing coarse particles, or PM10, for particles below 10 ¿m and subsequently to a fine particle (PM2.5) standard in 1997, for particles below 2.5 ¿m. The U.S. Environmental Protection Agency (EPA) retained the PM10 standard because all particles below 10 ¿m can penetrate into the pulmonary region. Be ...

Develop a miniature, lowcost scanning receiver.

Propse a design to generate a scalable team transportable command center by integrating the JTRS communication backbone into the JTWS collection system. This system is modular in software and hardware. The object oriented, software defined radio is modeled after the OSI protocol stack to abstract applications from specific transport and physical layer instantiations. The hardware modules containin ...

The goal of this Phase I research project is to investigate the feasibility and commercial potential of using the One Atmosphere Uniform Glow Discharge Plasma (OAUGDPTM) as a low-temperature sterilization process for medical equipment. Current sterilization technologies that pose a risk to health care workers and the environment are being phased out of use (e.g., ethylene oxide sterilization). T ...

B.E. Meyers & Company proposes to deliver the Phase I requirements of the AVPAS by utilizing its research and development resources to examine new technologies, architectures, and designs. These efforts will result in providing to the government the market research, proof-of-concept analysis, and a proposed design for an AVPAS prototype. The prototype design will be founded on incremental testin ...

The goal of this Phase I research project is to develop a novel MicroElectroMechanical Systems-based sensor capable of detecting low levels of biotoxins in drinking water. An automated detection system based on this technology will fulfill a critical need in homeland security threat management. Central to the proposed sensing approach is a resonating microstructure optimized for sensitive system ...