List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: FLIGHTWARE INC            Topic: DLA181002

    The In Process Control for L-PBF (IPCL) program leverages and in process inspection method recently developed and successfully demonstrated for NASA. This Layer Topographic Map or LTM method measures the surface if every melt layer using a commercial laser profilometer. LTM software detects, locates and identifies flawed regions within a layer for every layer in the part. It does so for several co ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Advanced Manufacturing Technologies

    SBC: FLIGHTWARE INC            Topic: DLA152001

    Real-time Automated Ply Inspection (RTAPI) is a layup inspection system that determines if the layup produced by an Automated Fiber Placement (AFP) machine meets drawing requirements. This is performed in real-time, while the machine is laying composite tapes onto the mold at very high speed, and provides several benefits. The fully automated system eliminates very slow and tedious manual inspecti ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  3. Low-cost, Regenerable Air Filter for Efficient Gaseous Pollutants Removal

    SBC: Precision Combustion, Inc.            Topic: 13NCERD2

    Precision Combustion, Inc. (PCI) is developing a regenerable high efficiency filter technology for direct removal of gaseous pollutants such as VOCs and CO2 from indoor air. In addition to controllably improving indoor air quality (IAQ), the direct removal of these pollutants will reduce the requirement for building ventilation with outdoor make-up air currently used to dilute the concentration of ...

    SBIR Phase II 2015 Environmental Protection Agency
  4. Manufacturing of Ultra-efficient and Robust Nano-array based Lean NOx Trapping Devices

    SBC: 3D Array Technology, LLC            Topic: 14NCER1C

    This project will result in a high-efficiency, low-cost nanostructure array (nano-array) based NOx aftertreatment devices to meet the need of reducing the NOx emission from the transportation industry and the usage of Pt-group metals (PGM). Synthesized via a low temperature solution process, a nano-array based Lean NOx Trapping (LNT) device will be developed and validated with great advantages ove ...

    SBIR Phase I 2015 Environmental Protection Agency
  5. Novel high-capacity, thermally stable, filter nanomaterials for multi-pollutant removal

    SBC: Precision Combustion, Inc.            Topic: 14NCER1C

    Precision Combustion, Inc. proposes to develop functionalized nanocarbons as an improved high capacity, regenerable filter for VOCs and other gaseous contaminants, tailored to the purpose of sorption of a broad array of air contaminants from indoor or industrial sources. The company’s sorbent offers to overcome limitations to air purification inherent to other commercial sorbents, including loss ...

    SBIR Phase I 2015 Environmental Protection Agency
  6. Real-time Automated Ply Inspection (RTAPI)

    SBC: FLIGHTWARE INC            Topic: DLA152001

    Real-time Automated Ply Inspection (RTAPI) is a layup inspection system that determines if the layup produced by an Automated Fiber Placement (AFP) machine meets drawing requirements. This is performed in real-time, while the machine is laying composite tapes onto the mold at very high speed, providing several benefits. As a fully automated system it eliminates very slow and tedious manual inspect ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  7. Low-Cost, Regenerable Air Filter for Efficient Gaseous Pollutants Removal

    SBC: Precision Combustion, Inc.            Topic: D

    Precision Combustion, Inc. (PCI) proposes to develop a regenerable, low-cost, high-efficiency pollution control technology for removal of gaseous pollutants from contaminated air streams. This innovative air filter technology will combine our novel proprietary Microlith® support elements with sorbent nanomaterials that can be tailored to capture a variety of targeted gaseous pollutants. Originall ...

    SBIR Phase I 2014 Environmental Protection Agency
  8. Fuel Flexible Low Emissions Burner for Waste-to-Energy Systems

    SBC: Precision Combustion, Inc.            Topic: F

    Waste-to-energy (WTE) technologies are being developed that combine waste management and energy generation. Theses wastes include a wide range of bio-based fuel stocks (biomass from wood and/or grasslands) or organic waste streams (manure and farm waste, municipal solid waste (MSW), sawdust). Much ingenuity is being directed to producing liquid fuels or useful solids such as char from biomass, b ...

    SBIR Phase I 2013 Environmental Protection Agency
  9. Novel Lignin-Based Magnetite Nanocomposites for Removal of Phosphate from Contaminated Waters

    SBC: SYNANOMET, LLC            Topic: B

    Phosphorus (P) remediation is an extremely difficult and costly environmental problem and could cost $44.5 billion dollars for treatment using conventional water treatment plants to meet EPA requirements. Phosphorous runoff can lead to“dead zones” due to eutrophication and can also cause hypoxia, leading to death of aquatic life that thrive in an oxygen-rich environment. None commercial prod ...

    SBIR Phase II 2013 Environmental Protection Agency
  10. Novel Lignin-Based Magnetite Nanocomposites for Removal of Phosphate from Contaminated Waters

    SBC: SYNANOMET, LLC            Topic: B

    This Small Business Innovation Research (SBIR) Phase I project will explore the synthesis and use of novel lignin-derived carbon-magnetite nanocomposites for removal of aqueous phosphate– a run off pollutant from agricultural farms that leads to eutrophication of lakes and other water reservoirs. The intellectual property related to nanocomposite synthesis (and associated applications) is exclu ...

    SBIR Phase I 2012 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government