List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. High surface-area, mesoporous oxide adsorbent sampling system.

    SBC: Orono Spectral Solutions Inc.            Topic: A10aT018

    The overall goal of this Phase II project is to develop a prototype micro-fluidic sampling system that will lead to a field-deployable detection system capable of detecting low ppb levels of chemical warfare agents (CWAs) and explosive precursors in water. The proposed work will capitalize on Phase I successes in which the feasibility of using an infrared-based micro-fluidic sampling system was d ...

    STTR Phase II 2011 Department of DefenseArmy
  2. Improved M8 Chemical Agent Detector Paper for Facilities Monitoring

    SBC: Orono Spectral Solutions Inc.            Topic: CBD11103

    The goal of this Phase I project is to develop coatings for M8 paper that improve its robustness and rate of detection of potential liquid/aerosol chemical warfare attack at fixed military sites and installations. A problem that is currently experienced with M8 paper is that it is easily contaminated by dust or destroyed by rain and thus requires frequent replacement in outdoor environments. Our ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  3. Composite DACS Nozzle for Next Generation Interceptor

    SBC: Fiber Materials, Inc.            Topic: MDA10013

    Fiber Materials Inc. (FMI) has developed and delivered carbon fiber reinforced silicon carbide (C-SiC) composite nozzles and thrust chambers for solid and liquid/gel fueled divert and attitude control systems (DACS) to Aerojet. The C-SiC material system has been validated with 3700 degrees F solid propellant. The proposed program will address identified barriers to transition of the material sys ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  4. Passive, Wireless Sensors for Turbine Engine Airfoils

    SBC: ENVIRONETIX TECHNOLOGIES CORPORATION            Topic: AF093124

    A critical need exists for miniature, passive, wireless sensors that can be placed on rotating parts within aircraft turbine engines to perform health monitoring of key components. To meet these needs, this SBIR Phase II project focuses on developing and field testing a passive, wireless microwave acoustic sensor system for turbine engines, capable of monitoring temperature and pressure on rotati ...

    SBIR Phase II 2011 Department of DefenseAir Force
  5. Lightweight, Flexible Ballistic Protection System for Arc Shaped Shelters

    SBC: Tex Tech Industries Inc.            Topic: A09169

    This SBIR will look to optimize four factors: ballistic protection, flexibility, weight and cube, and cost . The proposed arc tent protection system is intended to mitigate damage from indirect fire, such as a mortar attack, IEDs, and small arms fire. A mortar detonation causes two major threats to a soft-walled shelter. The mortar or IED releases fragments that have the capability to cause life t ...

    SBIR Phase II 2011 Department of DefenseArmy
  6. Autonomous Surface Threat Identification

    SBC: Technology Systems Inc.            Topic: N05129

    Maritime Security is derived from robust Situational Awareness and enabled through a man machine interface which promotes rapid human cognition. The ability to sense threats even in seemingly benign environments is key. Sensing threats early affords Fleet Operators critical timely reaction to set material conditions, station personnel, initiate a challenge and prepare responses. An approach has be ...

    SBIR Phase II 2011 Department of DefenseNavy
  7. Fabric with Variable Air Permeability for Use in Parachutes

    SBC: Wizbe Industries, Inc.            Topic: A10163

    Identification and Significance of the Problem or Opportunity. Current Military parachute canopies are constructed from cloth that has a fixed air permeability. The level of air permeability in a fabric significantly affects the opening speed of the parachute, filling time, opening shock and rate of descent. The air permeability of the fabric remains cannot be altered once the canopy is construc ...

    SBIR Phase I 2011 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government