You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Operating Temperature, Broadband Visible/Infrared HgCdTe Photodetectors

    SBC: EPIR TECHNOLOGIES INC            Topic: AF121067

    ABSTRACT:We propose the development of broadband high operating temperature two-color focal plane arrays (FPAs) that will allow simultaneous detection of radiation in the visible and infrared bands from the same target points. The first band will cover the 400 nm to 4 micron wavelength range and will be based on double layer planar heterostructures technology. The backside illuminated array will h ...

    SBIR Phase II 2016 Department of DefenseAir Force
  2. Thermal Management System Toolkit for Naval Warfare Applications

    SBC: CU AEROSPACE L.L.C.            Topic: N152115

    CU Aerospace (CUA), teamed with the University of Illinois at Urbana-Champaign (UIUC), proposes to research, develop, and demonstrate thermal management simulation tools for next-generation two-phase cooling systems designed for transient high heat-flux naval applications. The software developed in this program can be used to evaluate advanced thermal management designs for critical emerging naval ...

    SBIR Phase I 2016 Department of DefenseNavy
  3. Low Light Short Wave Infrared Focal Plane Arrays

    SBC: VOXTEL, INC.            Topic: MDA15022

    Current focal plane array (FPA) technologies for imaging in low-light conditions in the short wave infrared (SWIR) are limited by poor quantum efficiency and/or poor noise characteristics. To address this need, a new SWIR-sensitive linear-mode avalanche photodiode detector array, will be optimized for low-light imaging, fabricated, and demonstrated. Unlike existing SWIRavalanche photodiodes (APDs) ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  4. Non-Destructive Testing Method to Detect Red Plague Within an Insulated Silver-Plated Copper Conductor

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: MDA15024

    We propose to develop a non-destructive test method to identify and quantify the formation of red plague corrosion within an insulated silver-plated copper wire. Cross-linked ethylene-tetrafluoroethylene (XL-ETFE)-insulated silver-plated copper wire demonstrates high performance and is commonly used in military and aerospace applications as hook-up and lead wire, but is prone to galvanic corrosion ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  5. Adaptive-Zoom Weapon Scope with Integral Ranging, Tracking, and Fire Control

    SBC: VisSidus Technologies, Inc.            Topic: A152096

    Birds of prey, also known as raptors, are birds that hunt or feed on other animals. They are characterized by keen vision that allows them to detect prey during flight. Since vision is the most important sense for birds, and good eyesight is essential for safe flight, this group has a number of adaptations which give visual acuity superior to that of other vertebrate groups.The objective of this S ...

    SBIR Phase I 2016 Department of DefenseArmy
  6. Vehicle Roof Inflatable Impact Bladder (VRIIB)

    SBC: Combined Technology Solutions, LLC            Topic: A152098

    Non-traditional interior roof military vehicle impact injury prevention technologies address the challenge to provide warfighter survivability, allowing them to complete their mission, by preventing impact related injuries such as skull fractures and neck injuries, otherwise incurred during underbody blast, crash and rollover events. The solution accounts for the full range of occupants to include ...

    SBIR Phase I 2016 Department of DefenseArmy
  7. Application of ICME to Optimize Processing of State-of-the-art Gear Steels in Additive Manufacturing

    SBC: QUESTEK INNOVATIONS LLC            Topic: A15104

    Additive manufacturing (AM) is a novel process of fabricating components in a layer-by-layer method under the control of computer-aided design (CAD) information, rather than by the traditional use of casting molds and forming dies. Integrated Computational Materials Engineering (ICME) methodologies are effective tools to reconfigure the materials development process and accelerate implementation o ...

    SBIR Phase I 2016 Department of DefenseArmy
  8. Radiation-hardened Reconfigurable Digital Dual-band Infrared ROIC

    SBC: VOXTEL, INC.            Topic: MDA15019

    A 1280 x 1024, 12-micron-pitch format radiation-hardened dual-band digital infrared readout integrated circuit (ROIC) will be developed. The features of the reconfigurable adaptive detector integrated circuit (RadIC) include: low-noise in-pixel amplifiers, in-pixel analog-to-digital conversion (ADC), extended > 22-bit dynamic range with temporal-photon flux-rate encoding, high-rate readout, and as ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  9. Affordable Manufacturing of Refractory Metal Components

    SBC: Metal Technology            Topic: N142125

    Research the use of laser powder bed fusion to provide a lower cost method to manufacture complex geometries in C103 and other refractory metals.

    SBIR Phase I 2016 Department of DefenseNavy
  10. Harvestable Energy System for Use in Covered Locations

    SBC: Microlink Devices, Inc.            Topic: N153124

    The objective of the proposed project is to develop a lightweight, robust, and modular system, capable of harvesting solar energy in areas with dense foliage cover in an effective manner. The system proposed will be able to reach a height of 100 feet above an average tropical forest canopy to deploy a solar array capable of generating 250 W under AM1.5G 1-sun illumination. In this proposal, MicroL ...

    SBIR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government