You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Inorganic Radiation Resistant Solar Cell Coverglass Adhesives

    SBC: APPLIED THIN FILMS, INC            Topic: AF073095

    The USAF is seeking to replace UV-susceptible adhesive that bonds the solar cell to a cover glass for enhancing conversion efficiency and to improve durability. Adhesives used for space solar modules need to meet many critical requirements including adhesion strength, optical transparency, thermal stability, and resistance against a broad range of radiation present in space environments includin ...

    SBIR Phase I 2008 Department of DefenseAir Force
  2. CMAS mitigation for TBCs using a novel aluminum-phosphate based overlay coating

    SBC: APPLIED THIN FILMS, INC            Topic: N06032

    Environmental degradation of aerospace turbine components is a major concern for aircraft and power generation systems, and various surface treatments are utilized to extend the lifetimes of these critical components. This Phase II project is targeted toward extending the durability of thermal barrier coatings (TBCs) on hot section turbine components. TBCs are highly susceptible to degradation b ...

    SBIR Phase II 2008 Department of DefenseNavy
  3. Web-Scale Search-based Data Extraction and Integration: Geospatial Database Generation Agents-- Phase II

    SBC: CAZOODLE, INC.            Topic: A07124

    This proposal addresses topic A07-124 ``Geospatial Database Generation Agents'' aiming at developing the technology to populate the geometry and attribution of geospatial databases with information mined from open source text, tables, and non-spatial databases on the Web. As our solution, we propose to build the GeoEngine, a ``vertical-search'' system for finding and ranking information about geos ...

    SBIR Phase II 2008 Department of DefenseArmy
  4. Micro-burner Based Flame Ionization Detectors for Micro-scale Gas Chromatographs

    SBC: Cbana Laboratories            Topic: A08T014

    Micro-Gas Chromatographs (micro-GC) have the potential of providing a fieldable device that could 1) identify chemical threats in a battlefield, 2) provide assessment of warfighter health status, chemical exposure, stress level, and hydration, but we need better detectors if this potential is to become a reality. The objective of the proposed work to develop a micro-flame ionization detector (mi ...

    STTR Phase I 2008 Department of DefenseArmy
  5. Outdoor Biomass Gasifier Hydronic Heater (OBGHH)

    SBC: Chip Energy            Topic: N/A

    America needs a clean, affordable, reliable and sustainable product or system to obtain heat for residences in cold climates using renewable, carbon-neutral, plentiful, low-cost biomass fuels of diverse types found close to the location of usage. The available biomass could heat hundreds of thousands of homes, and costly natural gas could be directed to higher-value usage. Gasifiers are devices t ...

    SBIR Phase I 2008 Environmental Protection Agency
  6. Charged Micro Fuel Injection for Small, Heavy Fuel Engines

    SBC: COMPREHENSIVE FIELD DEMONSTRATIONS            Topic: OSD08UM1

    Charged fuel injection accelerates the fuel vaporization process to the point that heavy fuels can be efficiently combusted at significantly reduced ambient air temperatures and pressures in engines that range in horsepower from below 5 to around 200. Phase I will focus on analytically and experimentally demonstrating charged fuel injection within an off-the-shelf 8.5 hp Lombardini 6LD 400 direc ...

    SBIR Phase I 2008 Department of DefenseAir Force
  7. High Pressure Singlet Delta Oxygen Generator

    SBC: CU AEROSPACE L.L.C.            Topic: MDA07050

    The primary objective of CU Aerospace’s Phase I work will be to investigate a relatively new, highly innovative high pressure singlet-delta oxygen generator (SOG) concept for the chemical oxygen-iodine laser (COIL). Estimates are that this SOG concept will significantly improve the pressure recovery of COIL systems while retaining efficiency. The results of the Phase I research will lay the fo ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  8. Self-Healing Adhesives and Composites for Aerospace Systems

    SBC: CU AEROSPACE L.L.C.            Topic: AF06T025

    Self-healing composites and adhesives would alleviate longstanding problems in aerospace structures associated with multiple types of damage mechanisms such as mechanical/thermal fatigue, microcracking, and debonding. For example, a self-healing composite cryogenic tank would prevent leakage by sealing microcracks throughout the lifetime of the tank and enable the use of composites in this critica ...

    STTR Phase II 2008 Department of DefenseAir Force
  9. Design and Optimization of Radar Systems to Assist Rotorcraft Piloting in Adverse Environments

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N08141

    Rotorcraft are increasingly turning toward high-resolution Ka- through W-band radar sensors that can image terrain and obstructions but also see through the particulates that confound infrared and optical sensors, such as sand, ocean spray, and fog. As with any onboard sensor, designers must consider the antenna/platform interaction, and mature tools exist to address this type of problem. However ...

    SBIR Phase I 2008 Department of DefenseNavy
  10. Improved Analysis Techniques for Prediction of Avionics Electromagnetic Interference and Vulnerability

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N08132

    Physics-based modeling and simulation tools for predicting electromagnetic interference (EMI) and vulnerability (EMV) between RF systems are playing an increasingly important role in system level performance predictions. In order to accurately capture all of the complexity associated with RF systems on a modern military platform, very sophisticated multi-physics simulators using models of multiple ...

    SBIR Phase I 2008 Department of DefenseNavy
US Flag An Official Website of the United States Government