List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY, INC.            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Computational Tools to Enable Development of Alloys and Coatings for Advanced Gas Turbine Engines

    SBC: QUESTEK INNOVATIONS LLC            Topic: N162128

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to develop an ICME analysis tools involving Bayesian analysis, variance analysis, uncertainty management and database comparison and assessment functionalities to address the issue of database and model quality. QuesTek will apply the computational tool to improve databases and models ...

    SBIR Phase II 2018 Department of DefenseNavy
  4. Novel, High-Efficiency, Light-weight, Flexible Solar Cells as Electrical Power Generation Source

    SBC: MicroLink Devices            Topic: N16AT006

    MicroLink Devices proposes to integrate its high-efficiency, lightweight, and flexible solar sheets to the Puma UAS platform to significantly extend the flight endurance of the aircraft. The Navy has a growing fleet of small unmanned aerial system (UAS) vehicles that enable tactical intelligence, surveillance and reconnaissance (ISR) capabilities not possible before, and a need to extended mission ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Nickel Aluminum Bronze for Additive Manufacturing Alloy Development

    SBC: QUESTEK INNOVATIONS LLC            Topic: N171088

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to design and optimize a new Nickel Aluminum Bronze (NAB) alloy for use as feedstock material in directed energy deposition (DED)-based additive manufacturing (AM) in order to enable the development of AM technologies for quicker, cheaper, and more reliable production and repair of NAB ...

    SBIR Phase II 2018 Department of DefenseNavy
  6. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development / prototyping work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of the end-product. Pr ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  7. Development of 7050 T-74 Aluminum Alloy Alternative for use in Additive Manufacturing (AM) Systems

    SBC: QUESTEK INNOVATIONS LLC            Topic: N151010

    Additive Manufacturing (AM) promises to be an innovative technology that can enable rapid manufacturing of complex parts at greatly reduced cycle time. Application of this technology to the manufacture of aircraft structural components is limited by the lack of high-strength aluminum alloys optimized for AM processing. In this SBIR program, QuesTek Innovations, a leader in the field of integrated ...

    SBIR Phase II 2017 Department of DefenseNavy
  8. Widely Tunable Surface Emitting Quantum Cascade Lasers

    SBC: NOUR, LLC            Topic: N151023

    Infrared countermeasure and standoff chemical detection applications require a light source with high power output, good beam quality, and a wide tuning range. There are a limited number of viable mid-infrared (3-5 micron wavelength) solutions that can provide these features in a compact and power scalable architecture. In the proposed work, a single chip solution will be developed which will deli ...

    SBIR Phase II 2017 Department of DefenseNavy
  9. Naval Special Warfare (NSW) Diver Thermal Human Interface

    SBC: Welkins, LLC            Topic: N15AT012

    During Phase I of this project, WElkins identified, developed and established the technical merit of potential improvements to the SEAL Delivery Vehicle (SDV) Diver Human Thermal Interface (DHTI). In Phase II, we shall build prototypes of the next-generation DHTI, including a multi-zone Liquid Cooling Garment, Quick-Disconnect Coupling, and Fluid Delivery Lines. These prototypes will be tested in ...

    STTR Phase II 2017 Department of DefenseNavy
  10. Affordable CMAS-Resistant Thermal Barrier Coatings: Materials Genome Tools to Accelerate Calcium-Magnesium Alumino-Silicate (CMAS)-resistant Thermal

    SBC: QUESTEK INNOVATIONS LLC            Topic: N12AT019

    Existing TBC systems in aeroturbine engines, such as yittria partially-stabilized zirconia (YSZ), are highly susceptible to degradation by infiltrating molten deposits formed when calcium-magnesium-aluminosilicate (CMAS) particulates such as dust, sand, or volcanic ash are ingested into the engine. Assessing CMAS resistance of known TBCs for a wide variety of particulates (e.g. susceptibility of s ...

    STTR Phase II 2017 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government