List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  2. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: Dimensional Defense Corporation            Topic: DLA163003

    A newly developed technology and process applied to sealing packages provides enhanced features in authenticating commodities where anti-counterfeiting and anti-tampering security may be required. This novel sealing method used in conjunction with a unique software-based scan tool each afford unprecedented screening capabilities of multiple packages at vastly increased distance. This technology an ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  3. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Spectral Labs Incorporated            Topic: DLA171002

    During Phase II, Spectral Labs proposes using our multi-disciplined engineering, quality assurance, and production staff to complete reverse engineering of the NSN 6130-015487556 Battery Charger, P/N RF-5853-CH106 in order to become an approved source.Participating in this program will provide Spectral Labs with the experience to pursue future business with the DLA Value Management Unit. In additi ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  4. Increase Competition through Small Business Source Approval for Limited Source NSNs

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC            Topic: DLA171001

    The United States Department of Defense (DoD) has many types of weapons systems that must be continuously maintained.Many of the components required to maintain these weapon systems are single sourced, or are available from a limited number of sources, and are therefore quite often relatively expensive to procure.In recent years the DoD budget has been reduced making it more difficult to procure c ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  5. High-Efficiency Nutrient Removal and Recovery for Achieving Low Regulatory Limits

    SBC: MICROVI BIOTECH, INC.            Topic: 15NCER05

    Discharging nutrients such as phosphorus and ammonia to surface waters can have far reaching health and environmental impacts, including the formation of toxic algae blooms, eutrophication, and loss of water_x000D_ quality. The wastewater industry has a significant need for high-efficiency nutrient removal technologies. However, current nutrient removal treatment technologies can be costly and in ...

    SBIR Phase II 2017 Environmental Protection Agency
  6. Biofueled Thermoelectric Cookstove

    SBC: HI-Z TECHNOLOGY, INC.            Topic: 15NCER02

    Over 820 million Indians, about 65% of its population, cook on polluting open fires, causing ~1 million premature deaths annually. Fifty million households have no electricity. The Power Stove is a household energy solution combining clean cooking and reliable, ondemand power. Clean combustion and thermoelectric power technology, make it a high performance, user desirable solution based on low cos ...

    SBIR Phase II 2017 Environmental Protection Agency
  7. Implementation of Thermal Sensing Controls in Additive Manufacturing for Part Quality and Process Repeatability

    SBC: STRATONICS, INC.            Topic: DLA152001

    Stratonics, Inc. proposes to tightly integrate their modular thermal monitoring and control system across multiple additive manufacturing processes to create robust platforms, capable of consistent part quality and process repeatability. Software/hardware interface modules will be developed in a production ready solution with true temperature monitoring and active thermal controls to record key t ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  8. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development / prototyping work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of the end-product. Pr ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. Low-Cost Biological Solution for Reducing Carbon Pollution in Chemical Manufacturing

    SBC: INDUSTRIAL MICROBES, INC.            Topic: 14NCER1A

    Industrial Microbes is developing a green fermentation platform to replace carbon-emitting petrochemical production with newer methods that build chemicals out of methane and carbon dioxide.Chemical production is a major source of carbon pollution, responsible for 18% of direct industrialemissions. Our innovation is an engineered microbe that can consume carbon dioxide and methane and produce a ch ...

    SBIR Phase II 2016 Environmental Protection Agency
  10. Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) of On-Demand Environmentally Stable Structural Composite Parts

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA152001

    San Diego Composites, Inc. (SDC) is developing the Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) pod to produce on-demand, corrosion resistant, aluminum and stainless steel equivalent parts in less than three days. RAMCAM combines the advantageous 2 day lead time of custom parts produced by 3D printing with the 1 day forging of structural parts via composite compression ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government