You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Define/Demonstrate Non-hazardous or Less Hazardous Beryllium (Be) Material for Defense Applications

    SBC: Sensintel Inc.            Topic: MDA04059

    ACR will develop a beryllium replacement material suitable for use in the systems manufactured by Raytheon Missile Systems, Tucson, AZ. The work will include the identification of suitable materials such as metal alloys of magnesium or other materials as seen fit based on the required material properties of stiffness, density, strength and machinability. The processing knowledge gained during th ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  2. High-Strength Carbide-Based Fibrous Monolith Materials for Solid Rocket Nozzles

    SBC: Sensintel Inc.            Topic: MDA04T024

    Over the past 10 to 15 years, there has been a move towards the integration of ¡§advanced¡¨ materials with improved performance in hostile propulsion environments. Tantalum carbide is stable to very high temperatures (~3900„aC) under non-oxidizing conditions, but is relatively soft and erodes appreciably with aluminized propellants. In an effort to improve the strength and erosion resista ...

    STTR Phase II 2005 Department of DefenseMissile Defense Agency
  3. Barium Titanate Formation for Electronic/Photonic Applications

    SBC: INTEGRAL WAVE TECHNOLOGIES            Topic: MDA01014

    Integral Wave Technologies (for known as Arkansas Microelectronic Development Corporation) is developing a process for growing ferroelectric, polycrystalline barium titanate (BaTiO3) thin-films, by anodic oxidation of co-evaporated barium-titanium films (BaTi). Though films of this nature find applications in several electrical devices, Integral Wave will utilize this novel method of ferroelectri ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  4. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
  5. Innovative Manufacturing Processes

    SBC: INVENTEK CORP            Topic: MDA02021

    Application of a unique separator material, ceramic fiber separator (CFS), developed by Inventek, can serve as the foundation for advanced thermal batteries to triple EKV battery capacity at high power. A new rapid method of thin-cell production would use the fiber separator CFS as a carrier for tapecast cell assembly and reduce unit cost by 25%. In this method, a tunnel kiln process can produce ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  6. Cement-Polymer Composits from Recycled Polymer for Construdction Applications

    SBC: ATS-MER, LLC            Topic: N/A

    Conventional cement based construction materials such as stucco and concrete are prone to cracking with poor thermal insulation, and are very permeable to water. Repair of deteriorated cement based structures is a major problem, and in United States alone repair cost is estimated to be over $100 billion range. Commercial stuccos are susceptible to cracking under the influenced of repeated fluctu ...

    SBIR Phase II 2005 Environmental Protection Agency
  7. Biomimetic Nanostructured Coating for Dry Machining

    SBC: NanoMech, Inc.            Topic: N/A

    This Phase II proposes to develop an innovative nanostructured coating, with a unique integration of hard phases and lubrication phases, for dry machining of austenite steels for the automotive and aerospace industries. This novel coating will be synthesized using a combination of electrostatic spray coating (ESC), chemical vapor infiltration (CVI), and plasma etching. W unique biomimetic inspir ...

    SBIR Phase II 2005 Environmental Protection Agency
  8. Development of a Lightweight, Modular, Pediatric Wheelchair1

    SBC: THREE RIVERS HOLDINGS, LLC            Topic: N/A

    Further refinement of a Phase I developed prototype tilt-in-space wheelchair called the PALM specifically designed to meet pediatric needs; verification of functionality with end-user testing and evaluation will also be conducted

    SBIR Phase II 2005 Department of Education
  9. Biomimetic Nanostructured Coating for Dry Machining

    SBC: NanoMech, Inc.            Topic: 04NCERP1

    The goal of this research project is to develop an innovative nanostructured coating, with a unique integration of hard phases and lubrication phases, for dry machining of austenite steels for the automotive and aerospace industries. This novel coating will be synthesized using a combination of electrostatic spray coating, chemical vapor infiltration, and plasma etching. Unique biomime ...

    SBIR Phase II 2005 Environmental Protection Agency
  10. Cement-Polymer Composites from Recycled Polymers for Construction Applications

    SBC: Environmental Abrasives, LLC            Topic: 04NCERP1

    Conventional cement-based construction materials such as stucco and concrete are prone to cracking, provide poor thermal insulation, and are very permeable to water. The repair of deteriorated cement-based structures is a major problem. In the United States alone, repair costs are estimated to be more than $100 billion. Commercial stuccos are susceptible to cracking under the influence ...

    SBIR Phase II 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government